Osmo Wood Protector Clear 2.5L 4006

Osmo Wood Protector Clear 2.5L 4006D

EVEN MORE WATER PROTECTION

Especially for wood in moist environments.

Extremely water resistant
Food safe
Suitable for the interior and exterior
Animal and plant friendly once dry
Saliva-resistant and sweatproof, suitable for children’s toys
Microporous, breathable primer which does not crack, peel or flake
Supports a healthy living environment
No future applications necessary

BASE COAT

Clear

APPLICATION TOOL

Osmo Flat Brush, Osmo Microfibre Roller or by dipping

RECOMMENDED USE

Wood in moist environments such as bathrooms and kitchens

RECOAT

N/A

DRY TIME

24 hours when brushed, 36 hours when dipped

CLEAN UP

Osmo Brush Cleaner

COVERAGE

6-8.4m²/L with one coat

COATS

1 coat

SURFACE PREPARATION

Wood surface must be clean, dry and frost-free (moisture content max. 18%).
Osmo Wood Protector is ready to use. Do not thin.
Stir well before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Osmo Wood Protector is compatible with all conventional types of glue and putty (except for products containing silicon).

METHOD OF APPLICATION

Apply one time to the clean and dry wood with Osmo Flat Brush, Osmo Microfibre Roller or by dipping.
Coat the clean, dry and frost-free wood generously – if possible, on all sides.
Dipping process: approx. 2 minutes dipping time Ventilate well.
Top coat should be carried out within one week.

NOTE

Oils enhance the natural tone of wood (permanent wet effect).
Osmo Wood Protector is not to be used alone. Within one week, a top coat (with an oil-based Osmo wood finish) should be carried out.
When using Osmo Wood Protector on large areas under Osmo One Coat Only HS-PLUS, glossy spots may appear because of the extremely high content of solids in this finish.
Due to the strongly water-repellent effect, do not coat with water-soluble products (e.g. Interior Wax).

Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage.

CARE

Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.

Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.

Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.