Osmo Door Oil Clear Satin 5ml 3060
£1.30
Osmo Door Oil Clear Satin 5ml 3060
Osmo Door Oil Clear Satin 5ml 3060S
IDEAL FOR VENEERED DOORS
- Suitable for selected veneered doors and furniture
- Extremely water and dirt resistant
- 3060 Enhances the wood’s natural character
- 3033 Preserves the wood’s light colour ( lightly white pigmented)
- Saliva-resistant and sweatproof, also suitable for children’s toys
- No sanding necessary for future applications
- 3060 CLEAR, SATINEnhances the natural character of the wood which results in a warm and rich colour.
- 3033 RAW, MATTLight coloured wood stays light coloured, without the permanent wet effect.
FINISHES
Clear Satin, Raw Matt
APPLICATION TOOLS
Osmo Flat Brush or Microfibre Roller
RECOMMENDED USE
Interior wooden doors, frames and joinery
RECOAT
One coat, when signs of wear become visible
SIZES
5ml, 125ml, 1L
DRY TIME
24 hours
CLEAN UP
Osmo Brush Cleaner
COVERAGE
24m²/L with one coat
COATS
2 coats
CARE
Osmo Spray Cleaner
SURFACE PREPARATION
Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Door-Oil is ready to use. Do not thin. Shake well before use. For solid doors, clean old microporous stains thoroughly. Old paints,varnishes and lacquers must be completely removed. If renovating veneered doors, always check with the door manufacture that renovation is possible. Always wear a dust mask while sanding. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding P120-150 for solid wood doors. Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner. If possible, please apply the first coat to all sides before installation.
METHOD OF APPLICATION
With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. If applying the Door-Oil 3033 Raw, remove excess white pigment before allowing the surface to dry. Allow for good ventilation while drying. After drying, apply a second coat – also thinly.
NOTE
Applying the product too generously and insufficient ventilation lead to delays in drying time. Oils enhance the natural tone of wood (clear Door-Oil 3060 with permanent wetlook-effect). Osmo Door-Oil 3033 Raw counteracts exactly this effect and protects lighter coloured wood almost invisibly. The original look of the wood can be kept – no emphasising of the natural colour of the wood (no wetlook-effect). On dark/reddish wood species, Osmo Door-Oil 3033 Raw can be seen as a faintly white surface. Over application of Osmo Door-Oil 3033 Raw can also result in a faintly white surface. A trial application is recommended.
Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage.
CARE
Regular Cleaning: Dust mopping. Damp mopping using Osmo Spray-Cleaner.
Occasional Maintenance: For the Intensive cleaning of stubborn scuff marks, and refreshing the sheen on Osmo Door Oil 3060 clear satin, use clear Osmo Liquid Wax Cleaner. Avoid using Liquid Wax Cleaner over Osmo Door-Oil 3033 Raw matt as it will appear more shiny.
Recoating: Simply re-apply one coat onto the clean and dry surface when slight signs of wear become visible.