Osmo

Enhance and Protect Your Wood in Crediton, Near Exeter, Devon, with Osmo Wood Treatment - Officially Stocked by Eakers DIY!

Discover the power of Osmo Wood Treatment, a superior solution for transforming and safeguarding your wood in Crediton, a charming town located near Exeter in the beautiful county of Devon. As the official stockist of Osmo, Eakers DIY, based in Crediton, proudly offers you access to this exceptional, all-natural formula that deeply penetrates the wood, providing long-lasting protection against moisture, UV rays, and more. Experience the lasting beauty of your wood with Osmo.

Our breathable and flexible formula allows your wood to naturally breathe and flex, effectively preventing unsightly cracks and peeling. Enjoy the peace of mind knowing that your wood is shielded from the elements. Applying Osmo Wood Treatment is a breeze, and it dries quickly, saving you valuable time and effort. Choose from a diverse selection of attractive colors to enhance and showcase the innate beauty of your wood.

As the official stockist of Osmo, Eakers DIY in Crediton is the go-to destination for professionals and DIY enthusiasts alike in Crediton, Exeter, and throughout Devon. You can trust our expertise and reliability in providing top-notch wood treatment solutions. Bid farewell to concerns about rot, decay, and fading, and say hello to resilient and stunning wood surfaces. Discover the Osmo difference today!

Visit our esteemed store, conveniently located in Crediton, near Exeter in Devon, or get in touch with us for expert guidance on protecting and maintaining your wood with Osmo Wood Treatment. Your wood deserves the utmost care, and as the official stockist of Osmo, Eakers DIY in Crediton delivers on its promise of excellence. Don't miss out on the opportunity to experience the transformative power of Osmo Wood Treatment in Crediton, near Exeter, and throughout Devon! #OsmoWoodTreatment #WoodProtection #UnleashNaturalBeauty

Filter results

Osmo Decking-Oil Bangkirai Dark 750ml 016

Osmo Decking-Oil Bangkirai Dark 750ml 016C MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Garapa 2.5L 013

Osmo Decking-Oil Garapa 2.5L 013D MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Larch 2.5L 009

Osmo Decking-Oil Larch 2.5L 009D MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Bangkirai 2.5L 006

Osmo Decking-Oil Bangkirai 2.5L 006D MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Douglas Fir 2.5L 004

Osmo Decking-Oil Douglas Fir 2.5L 004D MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Bog Oak 125ml 021

Osmo Decking-Oil Bog Oak 125ml 021A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Grey 125ml 019

Osmo Decking-Oil Grey 125ml 019A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Bangkirai Dark 125ml 016

Osmo Decking-Oil Bangkirai Dark 125ml 016A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Massaranduba 125ml 014

Osmo Decking-Oil Massaranduba 125ml 014A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Garapa 125ml 013

Osmo Decking-Oil Garapa 125ml 013A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Thermowood 125ml 010

Osmo Decking-Oil Thermowood 125ml 010A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Larch 125ml 009

Osmo Decking-Oil Larch 125ml 009A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Bangkirai 125ml 006

Osmo Decking-Oil Bangkirai 125ml 006A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Decking-Oil Douglas Fir 125ml 004

Osmo Decking-Oil Douglas Fir 125ml 004A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Anti-Slip Decking Oil Clear (Topcoat) 750ml 430

Osmo Anti-Slip Decking Oil Clear (Topcoat) 750ml 430C Product Description Osmo Anti-Slip Decking Oil Clear (Topcoat) 750ml 430 is a clear, satin finish that provides water and dirt resistance, as well as an anti-slip surface. It is ideal for use on exterior decking made from softwood, hardwood, or composite materials. Osmo Anti-Slip Decking Oil Clear (Topcoat) 750ml 430 is easy to apply and maintain, and it will help your decking look its best for years to come. Features Provides water and dirt resistance Anti-slip surface Easy to apply and maintain Lasts for years Made from high-quality materials Backed by a trusted brand Benefits Protects your decking from the elements Makes your decking easier to clean and maintain Gives your decking a beautiful, natural finish Is affordable Comes with a warranty Call to action If you are looking for a clear, satin finish that provides water and dirt resistance, as well as an anti-slip surface, then Osmo Anti-Slip Decking Oil Clear (Topcoat) 750ml 430 is the perfect choice for you. Order yours today!

Add to wishlist

Osmo Decking-Oil Grey 750ml 019

Osmo Decking-Oil Grey 750ml 019C MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection.

Add to wishlist

Osmo Oil Stain Black 1L 3590

Osmo Oil Stain Black 1L 3590: The Ultimate Solution for Professionals Introduction: When it comes to wooden surfaces, professionals seek the quickest and most effective solutions. Osmo Oil Stain Black 1L 3590 is the go-to choice for those who demand excellence. Offering lightning-fast drying and curing times, exceptional durability, and a stunning range of color options, this product is designed specifically for commercial use. Whether you're working with common woods or exotic varieties, Osmo Oil Stain delivers outstanding results. In this comprehensive guide, we'll explore why Osmo Oil Stain is the preferred choice for professionals in the industry. Key Features: Lightning-Fast Drying and Curing: Osmo Oil Stain Black 1L 3590 is renowned for its rapid drying and curing capabilities. Professionals can save valuable time and complete projects faster, thanks to this exceptional feature. Unparalleled Durability: This product boasts extraordinary durability, ensuring your wooden surfaces remain in pristine condition even in high-traffic areas. It's exceptionally hardwearing, making it perfect for both flooring and furniture. Water and Dirt Resistance: Osmo Oil Stain provides superior protection against water and dirt. Its microporous, breathable finish keeps surfaces clean and pristine while preventing cracks, peeling, or flaking. Versatile Color Tones: With an array of attractive color tones, Osmo Oil Stain allows you to choose between transparent or intensive finishes. This versatility ensures you can achieve the desired aesthetic for your project. Commercial-Grade: Designed specifically for commercial use, Osmo Oil Stain Black 1L 3590 meets the rigorous demands of professionals. It's ideal for a wide range of applications, from large-scale flooring projects to intricate furniture pieces. Resists Common Spillages: Say goodbye to worries about spills. Osmo Oil Stain is resistant to common liquid spillages such as water, juice, tea, cola, and wine. It's even saliva-resistant and sweatproof, making it suitable for children's toys. Suitable for All Woods: Whether you're working with standard woods or exotic varieties, Osmo Oil Stain Black 1L 3590 is your trusted partner. It enhances the natural beauty of wood while providing unmatched protection. Application and Maintenance: Application Tool: Use the Osmo Floor Brush, Hand Pad, Double Blade Scraper, or Osmo Microfibre Roller, followed by a white pad for an even finish. Recommended Use: Ideal for interior wooden flooring and furniture, Osmo Oil Stain is a versatile choice for professionals. Recoat: When signs of wear become visible, a single coat is sufficient to refresh the surface. Dry Time: With Oil Stain Hardener, it dries in just 4 hours; without, allow 12 hours for optimal results. Clean Up: Use Osmo Brush Cleaner for easy cleanup. Coverage: Expect impressive coverage at 24-48m²/L with just one coat. Coats: Apply 1-2 coats and top it off with Osmo Polyx Oil for long-lasting protection. Surface Preparation: Before applying Osmo Oil Stain, ensure your wood surface is clean, dry, and frost-free. Sand carefully, and remove dust before proceeding. For unfamiliar surfaces, a trial application is recommended. Method of Application: Transparent color or intensive color, Osmo Oil Stain can be expertly applied with various tools. Ventilate well during drying for the best results. Care and Maintenance: Maintaining surfaces treated with Osmo Oil Stain is hassle-free. Regular cleaning with Osmo Wash and Care or Osmo Spray-Mop is recommended. For occasional maintenance, consider using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating is simple – just apply a single coat to the clean, dry surface when wear becomes noticeable. Experience Excellence with Osmo Oil Stain: Transform your woodworking projects into masterpieces with Osmo Oil Stain Black 1L 3590. Save time, ensure durability, and achieve impeccable results. Choose Osmo Oil Stain for wood surfaces that stand the test of time. Ready to Elevate Your Woodworking? Discover the power of Osmo Oil Stain today! Contact us now to place your order and experience the difference for yourself. Don't wait; elevate your woodworking projects to the next level with Osmo Oil Stain.

Add to wishlist

Osmo Oil Stain Light Grey 1L 3518

Osmo Oil Stain Light Grey 1L 3518 - Quick Cure for Professionals Elevate Your Woodwork with Osmo's Fast-Drying and Durable Oil Stain Transform your wood surfaces with Osmo Oil Stain - Order Now for Quick and Lasting Results! Osmo Oil Stain 3518: The Ultimate Solution for Professionals When it comes to woodwork, professionals demand not just quality but also efficiency. That's where Osmo Oil Stain 3518 shines. It's the go-to choice for those who want exceptionally fast drying, long-lasting results, and a finish that stands the test of time. Exceptional Speed and Durability Osmo Oil Stain 3518 is specially formulated for professionals who require speed without compromising on quality. It dries and cures at an impressive rate, allowing you to move on to the next stage of your project swiftly. But don't let its speed fool you; it's built to last. This oil stain is extremely durable and hardwearing, ensuring your woodwork remains pristine for years to come. Resistant to the Elements Whether your woodwork is indoors or exposed to the elements, Osmo Oil Stain 3518 has you covered. It's highly water and dirt resistant, making it suitable for various applications. From furniture to flooring, Osmo Oil Stain 3518 provides a protective barrier that keeps your wood looking its best, no matter what challenges it faces. A Palette of Attractive Tones Choose from a range of attractive colour tones, from transparent to intensive, allowing you to achieve the desired look for your project. Whether you're aiming for a subtle enhancement or a bold statement, Osmo Oil Stain 3518 provides the versatility you need. Versatile Application Osmo Oil Stain 3518 is specifically designed for commercial use, making it perfect for professionals in various industries. It's suitable for all wood types, including exotic woods. Plus, it's resistant to common liquid spillages like water, juice, tea, cola, and even wine. It's even saliva-resistant and sweatproof, making it suitable for children's toys. Breathable Finish That Lasts One of the key benefits of Osmo Oil Stain 3518 is its microporous, breathable finish. Unlike some finishes that can crack, peel, or flake over time, Osmo's unique formula ensures that your woodwork remains flawless. It won't hinder your wood's natural ability to breathe, maintaining its integrity. Easy Maintenance With Osmo Oil Stain 3518, maintenance is a breeze. No need for extensive sanding between applications; spot repairs and future applications are hassle-free. Discover the Osmo Difference Osmo offers a range of stunning colour tones, including Light Grey (3518) and others like Silver Grey (3512) and Jatoba (3516). It's suitable for interior wooden flooring and furniture, adding a touch of elegance to your spaces. Order Your Osmo Oil Stain Today Transform your woodwork with Osmo Oil Stain 3518. It's the quick cure for professionals who demand nothing but the best. Order now and experience the difference that Osmo brings to your wood projects. Your craftsmanship deserves Osmo.

Add to wishlist

Osmo Oil Stain White 125ml 3501

Osmo Oil Stain White 125ml 3501A: The Ultimate Solution for Professionals If you're seeking the quickest, most durable, and hardwearing solution for your interior wooden flooring and furniture, look no further than Osmo Oil Stain White 125ml 3501A. This remarkable product offers a host of features that make it the go-to choice for professionals and enthusiasts alike. Here's why it's your ultimate solution: Key Features: Exceptional Speed and Durability: Osmo Oil Stain is specially formulated for fast drying and curing, ensuring your projects are completed swiftly. Its extreme durability and hardwearing nature guarantee long-lasting results. Water and Dirt Resistance: Enjoy the peace of mind that comes with very high water and dirt resistance. Your surfaces remain protected against everyday challenges, maintaining their pristine appearance. Attractive Color Tones: Osmo Oil Stain offers a range of attractive color tones, whether you prefer a transparent finish or an intensive one. Achieve the look you desire with ease. Commercial Use: Specifically designed for commercial applications, this product is engineered to meet the demanding needs of professionals. Universal Application: Suitable for all types of woods, including exotic varieties, it's your one-stop solution for a wide range of wooden surfaces. Resists Liquid Spillages: This stain is resistant to common liquid spillages such as water, juice, tea, cola, and wine. It's also saliva-resistant and sweatproof, making it suitable for children's toys. Microporous and Breathable: The microporous finish allows the wood to breathe while preventing issues like cracking, peeling, or flaking. No Sanding Necessary: For spot repairs or future applications, you won't need to go through the hassle of sanding. This product simplifies maintenance. Available Colors: 3501 White 3512 Silver Grey 3514 Graphite 3516 Jatoba 3518 Light Grey 3519 Natural 3541 Havanna 3543 Cognac 3564 Tobacco 3590 Black Recommended Use: Ideal for interior wooden flooring and furniture, this product ensures a stunning finish that lasts. Recoat: When signs of wear become visible, a single coat is all you need to refresh your surfaces. Sizes Available: Choose from 5ml, 125ml, 1L, or 2.5L, depending on the scope of your projects. Dry Time: With Oil Stain Hardener, expect a quick 4-hour drying time. Without it, allow 12 hours for complete drying. Clean Up: Cleaning up after your project is effortless with Osmo Brush Cleaner. Coverage: Achieve impressive coverage of 24-48m² per litre with just one coat. Coats: Typically, one to two coats are sufficient, followed by a top coat of Polyx Oil for optimal results. Care: Maintain your surfaces with Osmo Wash and Care or Spray-Mop for regular cleaning. Occasional maintenance is simple with Osmo Liquid Wax Cleaner or Maintenance Oil. Surface Preparation: Ensure your wood surfaces are clean, dry, and frost-free. Remove old microporous stains, paints, and lacquers thoroughly. Sand carefully, and fill any cracks or holes with Osmo Wood Filler. A trial application is recommended, especially for unfamiliar surfaces. Method of Application: Transparent color tones can be applied thinly and evenly along the wood grain using Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece, or Double Blade Scraper. For intensive color, apply thinly along the grain and spread well. Ventilate well while drying. Note: Dark woods and hardwoods rich in extractives may require different products like Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx-Oil 2K Pure. A trial application is advised. For a truly white surface, consider pigmented Polyx-Oils. Experience the quick cure for professionals with Osmo Oil Stain White 125ml 3501A. Elevate your woodworking projects and enjoy the durability, ease of use, and stunning results this product delivers. Your surfaces will thank you for it.

Add to wishlist

Osmo Oil Stain Black 2.5L 3590

Osmo Oil Stain Black 2.5L 3590D: Elevate Your Woodworking to the Professional Level Introduction: For woodworking professionals who demand excellence, Osmo Oil Stain Black 2.5L 3590D is the ultimate solution. This product offers a quick cure, making it perfect for time-sensitive projects. It combines lightning-fast drying and curing with exceptional durability, water and dirt resistance, and a stunning range of color options. Designed specifically for commercial use, it's suitable for all woods, including exotics, and even resists common liquid spills. In this comprehensive guide, discover why Osmo Oil Stain Black 2.5L 3590D is the choice of professionals in the industry. Key Features: Lightning-Fast Drying and Curing: Osmo Oil Stain Black 2.5L 3590D sets the standard for speed. Its rapid drying and curing times save valuable time on your projects. Exceptional Durability: This product is extremely hardwearing, ensuring your wooden surfaces remain pristine even in high-traffic areas. Water and Dirt Resistance: Osmo Oil Stain provides superior protection against water and dirt. Its microporous, breathable finish keeps surfaces clean and prevents cracks, peeling, or flaking. Versatile Color Tones: Choose from attractive transparent or intensive color tones to achieve the desired aesthetic for your project. Commercial-Grade: Designed specifically for commercial use, Osmo Oil Stain Black 2.5L 3590D meets the rigorous demands of professionals. It's ideal for a wide range of applications, from large-scale flooring projects to intricate furniture pieces. Resists Common Spillages: Say goodbye to worries about spills. Osmo Oil Stain is resistant to common liquid spillages such as water, juice, tea, cola, and wine. It's even saliva-resistant and sweatproof, making it suitable for children's toys. Suitable for All Woods: Whether you're working with standard woods or exotic varieties, Osmo Oil Stain Black 2.5L 3590D is your trusted partner. It enhances the natural beauty of wood while providing unmatched protection. Application and Maintenance: Application Tool: Use the Osmo Floor Brush, Hand Pad, Double Blade Scraper, or Osmo Microfibre Roller, followed by a white pad for an even finish. Recommended Use: Ideal for interior wooden flooring and furniture, Osmo Oil Stain is a versatile choice for professionals. Recoat: When signs of wear become visible, a single coat is sufficient to refresh the surface. Dry Time: With Oil Stain Hardener, it dries in just 4 hours; without, allow 12 hours for optimal results. Clean Up: Use Osmo Brush Cleaner for easy cleanup. Coverage: Expect impressive coverage at 24-48m²/L with just one coat. Coats: Apply 1-2 coats and top it off with Osmo Polyx Oil for long-lasting protection. Surface Preparation: Before applying Osmo Oil Stain, ensure your wood surface is clean, dry, and frost-free. Sand carefully, and remove dust before proceeding. For unfamiliar surfaces, a trial application is recommended. Method of Application: Transparent color or intensive color, Osmo Oil Stain can be expertly applied with various tools. Ventilate well during drying for the best results. Experience Excellence with Osmo Oil Stain: Transform your woodworking projects into masterpieces with Osmo Oil Stain Black 2.5L 3590D. Save time, ensure durability, and achieve impeccable results. Ready to Elevate Your Woodworking? Discover the power of Osmo Oil Stain today! Contact us now to place your order and experience the difference for yourself. Don't wait; elevate your woodworking projects to the next level with Osmo Oil Stain.

Add to wishlist

Osmo Oil Stain Havanna 2.5L 3541

Osmo Oil Stain Havanna 2.5L 3541D THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Add to wishlist

Osmo Oil Stain Havanna 1L 3541

Osmo Oil Stain Havanna 1L 3541 THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Add to wishlist

Osmo Decking-Oil Thermowood 2.5L 010

Osmo Decking-Oil Thermowood 2.5L 010D Meeting the Demands of Wooden Decking If you're looking for a decking oil that can enhance and protect the natural beauty of your wooden deck, Osmo Decking-Oil Thermowood 2.5L 010D is the perfect solution. This high-quality decking oil offers a range of benefits that can help keep your decking looking great for years to come. One of the key advantages of Osmo Decking-Oil Thermowood 2.5L 010D is that it allows the natural wood character to remain visible. This means that you can enjoy the natural beauty of your decking without worrying about it being covered up or hidden by a layer of paint or varnish. In addition, this decking oil is safe for humans, animals, and plants once it's dry. So you can enjoy your decking without worrying about any harmful chemicals or toxins. Osmo Decking-Oil Thermowood 2.5L 010D is also highly water and dirt resistant, which helps to keep your decking clean and looking great. It's breathable, which reduces water logging, swelling, and shrinkage. And it's microporous, which means it provides a penetrating finish that doesn't crack, peel, or flake. One of the best things about this decking oil is that you don't need to sand your decking before topping up the coating. This makes it easy to maintain and keep your decking looking great over time. Osmo Decking-Oil Thermowood 2.5L 010D comes in a range of shades to suit different wood types and design preferences. You can choose from natural shades like 004 Douglas Fir, 006 Bangkirai, 009 Larch, 010 Thermowood, 013 Garapa, and 014 Massaranduba, or darker shades like 016 Bangkirai Dark, 019 Grey, 020 Black, and 021 Bog Oak. This decking oil is suitable for use on exterior wooden decking and furniture. It's easy to apply with a stiff brush or lint-free cloth, and you can expect a coverage of 24m²/L with one coat. The recommended dry time is 12 hours, and you can clean up with Osmo Brush Cleaner. To ensure the best results, it's important to prepare the surface of your decking before applying Osmo Decking-Oil Thermowood 2.5L 010D. Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking-Oil. Avoid using jet/power washers to clean the surface as they can significantly affect the coverage of Osmo Decking-Oil. Wood surface must be clean, dry, and frost-free (moisture content max. 20%). If you're looking for additional protection against blue stain, rot, and insect attack, you can pre-treat the wood with Osmo WR Impregnation. Overall, Osmo Decking-Oil Thermowood 2.5L 010D is an excellent

Add to wishlist

Osmo Oil Stain Natural 5ml 3519

Osmo Oil Stain Natural 5ml 3519S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Add to wishlist

1
2
3
4
Next
Showing 1 - 24 of 487 results

© Eakers DIY 2024.
Online Shop Builder & ePOS System by ShopTill-e.com