Osmo Country Colour

Osmo Country Colour

Transform the look of your outdoor wooden surfaces with Osmo Country Colour. Available in a wide range of colours including White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar-Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey and Traffic Grey, there is a shade to suit every style and taste.

Whether you want to refresh the appearance of your garden furniture, fence, shed or decking, Osmo Country Colour offers excellent coverage and protection against the elements. The micro-porous finish allows the wood to breathe while repelling moisture, preventing cracking, peeling and blistering.

Available in four sizes: 5ml, 125ml, 750ml and 2.5L, Osmo Country Colour is easy to apply with a brush or roller, dries quickly and can be recoated in just 12 hours. With a long-lasting, satin-matt finish, this high-quality oil-based paint is the perfect solution for those looking for an attractive and durable finish for their outdoor wooden surfaces.


Filter results

Elevate your outdoor wood surfaces with Osmo Country Colour - Where Protection Meets Brilliance. Introduction: Transform your outdoor wood with the radiance of Osmo Country Colour White 750ml 2101C. This exceptional exterior wood finish is more than a protector; it's a celebration of vibrant, enduring beauty. Crafted to withstand the harshest weather conditions, Osmo Country Colour ensures your wood remains splendid year after year. Key Features: Extreme Weather and UV Resistance: Defend your wood against the elements with unrivaled resistance to weather and UV rays. Exceptional Water and Dirt Resistance: Maintain the allure of your wood as this finish repels water and dirt effectively. Minimizes Wood Swelling and Shrinkage: Say farewell to the natural tendencies of wood to swell and shrink; this formula provides unwavering stability. Enhances Natural Wood Grain: Revel in wood's intrinsic beauty; this finish artfully highlights the natural wood grain. Breathable and Microporous Finish: A finish that breathes, prevents cracks, peels, or flakes, preserving your wood's integrity. Effortless Recoating: Simplify maintenance as sanding is unnecessary for future applications. A Palette of Dazzling Colors: Choose from an extensive array of colors, from classic whites to captivating blues and earthy browns. Available Finishes: Osmo Country Colour offers various finishes, including Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, and Traffic Grey. Application Tool: For ease and efficiency, utilize an Osmo Flat Brush or Osmo Microfibre Roller. Recommended Usage: Ideal for exterior wood surfaces, Osmo Country Colour is your go-to for projects like sheds, fences, and more. Recoating: One coat is typically sufficient, and reapplication is necessary only when wear becomes noticeable. Sizes Available: Select the perfect size for your project, with options ranging from 5ml to 2.5L tins. Quick Drying: Allow 10-12 hours for the formula to dry thoroughly. Clean Up: Cleaning up is effortless with Osmo Brush Cleaner. Coverage: Achieve approximately 26m² per liter with one coat, ensuring exceptional coverage. Coats: For optimal results, apply two coats. Surface Preparation: Prepare your wood surface, ensuring it's clean, dry, and frost-free, with moisture content not exceeding 20%. Always conduct a trial application, especially for unfamiliar surfaces. Application Method: Apply thinly and evenly along the wood grain with an Osmo Flat Brush or Osmo Microfibre Roller. Allow 10-12 hours to dry under proper ventilation, then apply a second coat thinly. In most renovation cases, a single coat on a clean, dry surface suffices. Note: For additional protection in outdoor areas like windows and cladding, apply a top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's lifespan. For Country Colour White 2101, consider using Natural Oil Woodstain White 900. Unlock Wood's Radiance: Experience the brilliance and longevity of your exterior wood surfaces with Osmo Country Colour White 750ml 2101C. Enhance your outdoor spaces with protection, elegance, and timeless allure. It's time to celebrate wood's luminous beauty with Osmo.
Osmo Country Colour White 750ml 2101 has been your wishlist!
Add to wishlist
Transform your exterior wood surfaces with Osmo Country Colour - The essence of vibrant and enduring protection. Introduction: Explore the stunning possibilities of Osmo Country Colour White 5ml 2101S, your gateway to vibrant, long-lasting, and protected exterior wood. This exceptional wood finish encapsulates a world of possibilities, providing not only protection but also beauty to your outdoor spaces. With a spectrum of colors to choose from, Osmo Country Colour ensures your wood stands the test of time in style. Key Features: Extremely Weather and UV Resistant: Defy harsh weather conditions and UV rays with this formula, ensuring your wood remains untouched and vibrant. Highly Water and Dirt Resistant: Keep your wood clean and beautiful, as this finish effectively repels water and dirt. Reduces Wood Swelling and Shrinkage: Say goodbye to wood's natural tendencies to swell and shrink as this formula provides dependable stability. Natural Wood Grain Enhancement: Celebrate the inherent beauty of wood while protecting it. The natural wood grain is beautifully highlighted. Microporous and Breathable Finish: A finish that breathes, prevents cracking, peeling, or flaking, ensuring your wood stays in top shape. Effortless Recoating: Simplify maintenance; no sanding is necessary for future applications. A Kaleidoscope of Colors: Select from an extensive palette of colors, from timeless whites to earthy browns and captivating blues. Finishes Available: Osmo Country Colour offers various finishes, including Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, and Traffic Grey. Application Tool: For ease and efficiency, use an Osmo Flat Brush or Osmo Microfibre Roller. Recommended Use: Perfect for exterior wood surfaces, Osmo Country Colour is an ideal choice for sheds, fences, and more. Recoat: A single coat is sufficient, and reapplication is necessary only when wear becomes visible. Sizes Available: Choose the size that suits your project, with options ranging from 5ml to 2.5L tins. Quick Drying: Allow 10-12 hours for the formula to dry thoroughly. Cleanup: Cleaning up is a breeze with Osmo Brush Cleaner. Coverage: Achieve approximately 26m² per liter with one coat, ensuring excellent coverage. Coats: For optimal results, apply two coats. Surface Preparation: Prepare your wood surface, ensuring it's clean, dry, and frost-free with moisture content not exceeding 20%. Always conduct a trial application, especially for unfamiliar surfaces. Method of Application: Apply thinly and evenly along the wood grain with an Osmo Flat Brush or Osmo Microfibre Roller. Allow 10-12 hours to dry under proper ventilation, then apply a second coat thinly. In most renovation cases, a single coat on a clean, dry surface suffices. Note: For additional protection in outdoor areas like windows and cladding, apply a top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This protects against dirt contamination and extends the finish's lifespan. For Country Colour White 2101, consider using Natural Oil Woodstain White 900. Unlock the Beauty of Wood: Experience the vibrancy and longevity of your exterior wood surfaces with Osmo Country Colour White 5ml 2101S. Enhance your outdoor spaces with protection, elegance, and enduring charm. It's time to celebrate the beauty of wood with Osmo.
Osmo Country Colour White 5ml 2101 has been your wishlist!
Add to wishlist
Protect, beautify, and embrace the outdoors with Osmo Country Colour - Unleash vibrant possibilities. Introduction: Elevate your outdoor spaces with Osmo Country Colour White 2.5L 2101D, the premium choice for preserving, enhancing, and celebrating your wood surfaces. Designed for the great outdoors, this exceptional wood finish is your key to a vibrant and protected exterior. With a stunning array of colors, Osmo Country Colour offers a unique blend of protection and style, making it the top choice for your outdoor wood surfaces. Key Features: Weather and UV Resistant: Defy the elements with this extremely weather and UV-resistant formula. Your wood will remain untouched by rain, shine, or time. Water and Dirt Resistant: Repel water and dirt with ease, ensuring your wood stays clean and beautiful. Minimizes Wood Swelling and Shrinkage: Say goodbye to the hassles of wood swelling and shrinkage, as this formula provides reliable stability. Natural Wood Grain Enhancement: While providing protection, Osmo Country Colour celebrates the natural wood grain, adding to the charm of your outdoor space. Microporous and Breathable Finish: Breathe life into your wood with this microporous finish that doesn't crack, peel, or flake. Effortless Recoating: No need for sanding during future applications, simplifying your maintenance routine. A Spectrum of Possibilities: Choose from a wide range of colors to suit your style and preferences. From classic white to earthy browns and vibrant blues, the options are endless. Finishes Available: Osmo Country Colour is available in a variety of finishes, including Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, and Traffic Grey. Application Tool: For easy and efficient application, use an Osmo Flat Brush or Osmo Microfibre Roller. Recommended Use: Ideal for exterior wood surfaces, Osmo Country Colour is your go-to solution for sheds, fences, and more. Recoat: A single coat suffices, and reapplication is only necessary when signs of wear become visible. Sizes Available: Choose the size that suits your project, with options ranging from 5ml, 125ml, 750ml to the generous 2.5L tin. Quick Drying: Allow 10-12 hours for the formula to dry completely. Cleanup: Cleaning up is a breeze with Osmo Brush Cleaner. Coverage: Achieve approximately 26m² per liter with one coat, ensuring excellent coverage. Coats: For optimal results, apply two coats. Surface Preparation: Ensure your wood surface is clean, dry, and frost-free with a moisture content of no more than 20%. If possible, apply the first coat to all sides before installation. Remove old microporous stains thoroughly, and for unfamiliar surfaces, always conduct a trial application. Method of Application: Use an Osmo Flat Brush or Osmo Microfibre Roller to apply thinly and evenly along the wood grain. Allow 10-12 hours to dry under proper ventilation, then apply a second coat thinly. In most renovation cases, a single coat on a clean, dry surface suffices. Note: For added protection in outdoor areas like windows and cladding, apply a top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This protects against dirt contamination and extends the finish's lifespan. For Country Colour White 2101, consider using Natural Oil Woodstain White 900. Unlock Your Wood's Potential: Unleash the vibrancy of your outdoor wood surfaces with Osmo Country Colour White 2.5L 2101D. Elevate your space with protection, style, and enduring beauty. It's time to celebrate the outdoors with Osmo.
Osmo Country Colour White 2.5L 2101 has been your wishlist!
Add to wishlist
Introducing Osmo Country Colour Traffic Grey 750ml 2742C: Excellence in Exterior Wood Protection Elevate the longevity and aesthetics of your exterior wood surfaces with Osmo Country Colour Traffic Grey 750ml 2742C. This versatile wood finish offers a wide array of benefits to protect and enhance your outdoor wooden elements. Key Features: Extreme Weather and UV Resistance: Stand up to the toughest weather conditions and unrelenting UV exposure with remarkable resilience. Water and Dirt Resistance: Provides dependable protection against water and dirt, preserving your wood's integrity. Reduction in Wood Swelling and Shrinkage: Minimize the natural tendency of wood to swell and shrink due to environmental changes, ensuring long-lasting performance. Natural Wood Grain Concealed: Achieve an appealing opaque finish that hides the natural wood grain, offering a consistent appearance. Microporous and Breathable Finish: Allow your wood to breathe while preventing issues like cracking, peeling, or flaking. This ensures your wood remains strong and beautiful. Minimal Maintenance: Future applications are hassle-free, with no extensive sanding required. A Rainbow of Colours: Explore a rich palette of colours, including Labrador Blue, Dusk Grey, Dark Brown, and more, to suit your design preferences. Versatile Range of Finishes: Select from various finishes such as Charcoal, Dove Blue, Light Grey, and more to achieve your desired look and level of protection. Designed for Exterior Wood Surfaces: Osmo Country Colour is specifically formulated for exterior wood surfaces, making it ideal for decks, fences, garden furniture, and more. Coverage and Application: Each litre of Osmo Country Colour covers approximately 26 square metres with just one coat. For optimal protection and appearance, two coats are typically recommended. The product dries within 10-12 hours, allowing your project to proceed efficiently. Cleanup is effortless with Osmo Brush Cleaner. Surface Preparation: To achieve the best results, ensure your wood surface is clean, dry, and free from frost, with a maximum moisture content of 20%. Osmo Country Colour is ready to use, so do not thin it. Stir it well before use, and if possible, apply the first coat to all sides of the wood for comprehensive protection. Remember to clean old stains thoroughly and remove old paints and lacquers. Prioritize safety by wearing a dust mask during sanding. For unfamiliar surfaces, a trial application is recommended. To provide additional protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Applying Osmo Country Colour is straightforward. Apply it thinly and evenly along the wood grain with an Osmo Flat Brush or Osmo Microfibre Roller. Allow it to dry for about 10-12 hours with proper ventilation before applying a second coat thinly. For renovation projects, one coat on the clean and dry surface is generally sufficient. Note for Extra Protection: For outdoor areas like windows and cladding that require additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's lifespan. If you're using Country Colour White 2101, please use Natural Oil Woodstain White 900. Some wood species may contain water-soluble coloured extractives that can naturally leach out when exposed to the elements. Product Benefits: Osmo Country Colour not only protects your wood but enhances its appearance. With a wide range of vibrant colours, it's available in numerous RAL Classic and NCS colour tones, as well as options with biocidal film protection additives. This finish is meticulously designed to withstand the toughest outdoor conditions while preserving the natural beauty of wood. Caring for Your Outdoor Oasis: Regular Cleaning: Keep your outdoor space looking its best with regular damp cleaning using Osmo Decking Cleaner and the Osmo Decking Cleaning Brush. Occasional Maintenance: For those moments when your wood surfaces need some extra TLC, consider intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: When you notice signs of wear becoming visible, it's as easy as re-applying one coat onto the clean and dry surface to keep your outdoor space looking fresh and vibrant. Elevate your exterior wood surfaces with Osmo Country Colour Traffic Grey 750ml 2742C. Embrace a world of vibrant colours, reliable protection, and long-lasting beauty for your wood.
Osmo Country Colour Traffic Grey 750ml 2742 has been your wishlist!
Add to wishlist
Experience Excellence with Osmo Country Colour Traffic Grey 5ml 2742S Discover the remarkable protection and versatility of Osmo Country Colour Traffic Grey 5ml 2742S. Elevate the beauty and longevity of your exterior wood surfaces with this exceptional wood finish. Unveiling Key Features for Exceptional Results: Extreme Weather and UV Resistance: Defy the elements with confidence. This finish is engineered to withstand the harshest weather conditions and relentless UV exposure, ensuring your wood remains vibrant and strong. Water and Dirt Resistance: Bid farewell to concerns of water damage and dirt accumulation. Osmo Country Colour offers dependable protection, safeguarding your wood's integrity. Wood Swelling and Shrinkage Reduction: Wood naturally expands and contracts due to environmental changes. Osmo Country Colour minimizes these effects, ensuring your wood retains its performance for years to come. Concealed Natural Wood Grain: Achieve a uniform and appealing opaque finish that conceals the natural wood grain. This imparts a consistent and fresh appearance to your wood. Breathable, Crack-Free Finish: Allow your wood to breathe while preventing issues like cracking, peeling, or flaking. This finish preserves your wood's innate beauty and integrity. Minimal Maintenance: Enjoy convenience with minimal maintenance requirements. No extensive sanding is needed when future applications are required, saving you time and effort. A Kaleidoscope of Colours: Osmo Country Colour offers a kaleidoscope of colours to choose from, including Labrador Blue, Dusk Grey, Dark Brown, and many more. Versatile Range of Finishes: Select from a versatile range of finishes such as Charcoal, Dove Blue, Light Grey, and more to achieve your desired look and level of protection. Designed for Exterior Wood Surfaces: Tailored for exterior wood surfaces, Osmo Country Colour is your ideal choice for decks, fences, garden furniture, and more. Coverage and Application: A little goes a long way. With just one coat, each litre of Osmo Country Colour covers approximately 26 square metres. Typically, two coats are recommended for optimal protection and appearance. The product dries in 10-12 hours, allowing your project to progress efficiently. Cleanup is effortless with Osmo Brush Cleaner. Surface Preparation: To achieve the best results, ensure your wood surface is clean, dry, and free from frost, with a maximum moisture content of 20%. Osmo Country Colour is ready to use and doesn't require thinning. Stir well before use, and if possible, apply the first coat to all sides of the wood for comprehensive protection. Remember to clean old stains thoroughly and remove old paints and lacquers. Safety first: wear a dust mask during sanding. For unfamiliar surfaces, a trial application is recommended. For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Applying Osmo Country Colour is straightforward. Apply it thinly and evenly along the wood grain with an Osmo Flat Brush. Allow it to dry for about 10-12 hours with proper ventilation before applying a second coat thinly. For renovation projects, one coat on the clean and dry surface is generally sufficient. Note for Extra Protection: For outdoor areas like windows and cladding that require additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's lifespan. If you're using Country Colour White 2101, please use Natural Oil Woodstain White 900. Some wood species may contain water-soluble coloured extractives that can naturally leach out when exposed to the elements. Product Benefits: Osmo Country Colour doesn't just protect your wood; it enhances and transforms it. With a wide range of vibrant colours, it's available in numerous RAL Classic and NCS colour tones, as well as options with biocidal film protection additives. This finish is meticulously designed to withstand the toughest outdoor conditions while preserving the natural beauty of wood. Caring for Your Outdoor Oasis: Regular Cleaning: Keep your outdoor space looking its best with regular damp cleaning using Osmo Decking Cleaner and the Osmo Decking Cleaning Brush. Occasional Maintenance: For those moments when your wood surfaces need some extra TLC, consider intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: When you notice signs of wear becoming visible, it's as easy as re-applying one coat onto the clean and dry surface to keep your outdoor space looking fresh and vibrant. Elevate your exterior wood surfaces with Osmo Country Colour Traffic Grey 5ml 2742S. Embrace a world of vibrant colours, reliable protection, and long-lasting beauty for your wood.
Osmo Country Colour Traffic Grey 5ml 2742 has been your wishlist!
Add to wishlist
Elevate Your Exterior Wood with Osmo Country Colour Traffic Grey 2.5L 2742D Introducing Osmo Country Colour Traffic Grey 2.5L 2742D, a versatile wood finish designed to enhance both the aesthetics and durability of your exterior wood surfaces. Key Features for Outstanding Protection: Exceptionally Weather and UV Resistant: Face even the most challenging weather conditions and relentless UV exposure with confidence. This finish is built to withstand the elements, ensuring your wood remains vibrant and strong. Resistant to Water and Dirt: Say goodbye to worries about water damage and dirt buildup on your outdoor wood. Osmo Country Colour provides reliable protection, preserving your wood's integrity. Reduced Wood Swelling and Shrinkage: Wood naturally expands and contracts with changes in the environment. Osmo Country Colour helps minimize these effects, guaranteeing your wood's long-lasting performance. Natural Wood Grain Concealed: Achieve a uniform and attractive opaque finish that conceals the natural wood grain. This imparts a consistent and fresh appearance to your wood. Microporous and Breathable Finish: Allow your wood to breathe while preventing issues like cracking, peeling, or flaking. This finish preserves your wood's innate beauty. Minimal Maintenance: Enjoy convenience with minimal maintenance requirements. No extensive sanding is needed when future applications are required, saving you time and effort. A Spectrum of Colours: Osmo Country Colour offers a wide spectrum of colours to choose from, including Traffic Grey, Dark Brown, Labrador Blue, and many more. Versatile Finishes: Select from various finishes like Opaque White, Charcoal, Dusk Grey, and more to achieve your desired look and level of protection. Ideal for Exterior Wood Surfaces: This wood finish is tailored for exterior wood surfaces, making it perfect for decks, fences, garden furniture, and more. Coverage and Application: A little goes a long way. Each litre of Osmo Country Colour covers approximately 26 square metres with just one coat. Typically, two coats are recommended for optimal protection and appearance. The product dries in 10-12 hours, allowing your project to progress efficiently. Cleanup is a breeze with Osmo Brush Cleaner. Surface Preparation: To achieve the best results, ensure that your wood surface is clean, dry, and free from frost, with a maximum moisture content of 20%. Osmo Country Colour is ready to use and doesn't require thinning. Stir well before use, and if possible, apply the first coat to all sides of the wood for comprehensive protection. Remember to clean old stains thoroughly and remove old paints and lacquers. Safety first: wear a dust mask during sanding. For unfamiliar surfaces, a trial application is recommended. For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Applying Osmo Country Colour is straightforward. Apply it thinly and evenly along the wood grain with an Osmo Flat Brush. Allow it to dry for about 10-12 hours with proper ventilation before applying a second coat thinly. For renovation projects, one coat on the clean and dry surface is generally sufficient. Note for Extra Protection: For outdoor areas like windows and cladding that require additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's lifespan. If you're using Country Colour White 2101, please use Natural Oil Woodstain White 900. Some wood species may contain water-soluble coloured extractives that can naturally leach out when exposed to the elements. Product Benefits: Osmo Country Colour doesn't just protect your wood; it enhances and transforms it. With a wide range of vibrant colours, it's available in numerous RAL Classic and NCS colour tones, as well as options with biocidal film protection additives. This finish is meticulously designed to withstand the toughest outdoor conditions while preserving the natural beauty of wood. Caring for Your Outdoor Oasis: Regular Cleaning: Keep your outdoor space looking its best with regular damp cleaning using Osmo Decking Cleaner and the Osmo Decking Cleaning Brush. Occasional Maintenance: For those moments when your wood surfaces need some extra TLC, consider intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: When you notice signs of wear becoming visible, it's as easy as re-applying one coat onto the clean and dry surface to keep your outdoor space looking fresh and vibrant. Elevate your exterior wood surfaces with Osmo Country Colour Traffic Grey 2.5L 2742D. Unleash your creativity, embrace vibrant colours, and ensure long-lasting protection for your wood.
Osmo Country Colour Traffic Grey 2.5L 2742 has been your wishlist!
Add to wishlist
Introducing Osmo Country Colour Traffic Grey 125ml 2742A: Elevate Your Exterior Wood Protection Upgrade the aesthetics and durability of your exterior wood surfaces with Osmo Country Colour Traffic Grey 125ml 2742A. This versatile wood finish offers a colourful diversity of benefits to safeguard and enhance your outdoor wooden elements. Key Features: Exceptional Weather and UV Resistance: Withstand harsh weather conditions and UV exposure with remarkable resilience. Effective Water and Dirt Resistance: Ensure reliable protection against water and dirt, preserving the integrity of your wood. Reduced Wood Swelling and Shrinkage: Minimize wood swelling and shrinkage, promoting long-lasting performance. Concealed Natural Wood Grain: Achieve an appealing opaque finish that hides the natural wood grain, providing a consistent appearance. Breathable Microporous Finish: Allow your wood to breathe while preventing issues like cracking, peeling, or flaking. This ensures your wood remains strong and beautiful. Low Maintenance: No extensive sanding required when future applications are necessary. Colour Options: Explore a vibrant spectrum of colours, including Labrador Blue, Dusk Grey, Dark Brown, and more, to match your design preferences. Variety of Finishes: Select from various finishes such as Charcoal, Dove Blue, Light Grey, and more to achieve your desired look and level of protection. Designed for Exterior Wood Surfaces: Osmo Country Colour is specifically formulated for exterior wood surfaces, making it ideal for decks, fences, garden furniture, and more. Coverage and Application: Each litre of Osmo Country Colour covers approximately 26 square metres with just one coat. For optimal protection and appearance, two coats are typically recommended. The product dries within 10-12 hours, allowing your project to proceed efficiently. Cleanup is effortless with Osmo Brush Cleaner. Surface Preparation: To achieve the best results, ensure your wood surface is clean, dry, and free from frost, with a maximum moisture content of 20%. Osmo Country Colour is ready to use, so do not thin it. Stir it well before use, and if possible, apply the first coat to all sides of the wood for comprehensive protection. Remember to clean old stains thoroughly and remove old paints and lacquers. Prioritize safety by wearing a dust mask during sanding. For unfamiliar surfaces, a trial application is recommended. To provide additional protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Applying Osmo Country Colour is straightforward. Apply it thinly and evenly along the wood grain with an Osmo Flat Brush or Osmo Microfibre Roller. Allow it to dry for about 10-12 hours with proper ventilation before applying a second coat thinly. For renovation projects, one coat on the clean and dry surface is generally sufficient. Note for Extra Protection: For outdoor areas like windows and cladding that require additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's lifespan. If you're using Country Colour White 2101, please use Natural Oil Woodstain White 900. Some wood species may contain water-soluble coloured extractives that can naturally leach out when exposed to the elements. Product Benefits: Osmo Country Colour not only protects your wood but enhances its appearance. With a wide range of vibrant colours, it's available in numerous RAL Classic and NCS colour tones, as well as options with biocidal film protection additives. This finish is meticulously designed to withstand the toughest outdoor conditions while preserving the natural beauty of wood. Caring for Your Outdoor Oasis: Regular Cleaning: Keep your outdoor space looking its best with regular damp cleaning using Osmo Decking Cleaner and the Osmo Decking Cleaning Brush. Occasional Maintenance: For those moments when your wood surfaces need some extra TLC, consider intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: When you notice signs of wear becoming visible, it's as easy as re-applying one coat onto the clean and dry surface to keep your outdoor space looking fresh and vibrant. Elevate your exterior wood surfaces with Osmo Country Colour Traffic Grey 125ml 2742A. Embrace a world of vibrant colours, reliable protection, and long-lasting beauty for your wood.
Osmo Country Colour Traffic Grey 125ml 2742 has been your wishlist!
Add to wishlist
Osmo Country Colour Sunflower Yellow 750ml 2205C COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Sunflower Yellow 750ml 2205 has been your wishlist!
Add to wishlist
Osmo Country Colour Sunflower Yellow 5ml 2205S COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Sunflower Yellow 5ml 2205 has been your wishlist!
Add to wishlist
Osmo Country Colour Sunflower Yellow 2.5L 2205D COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Sunflower Yellow 2.5L 2205 has been your wishlist!
Add to wishlist
Osmo Country Colour Sunflower Yellow 125ml 2205A COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Sunflower Yellow 125ml 2205 has been your wishlist!
Add to wishlist
Osmo Country Colour Signal Red 750ml 2311C COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Signal Red 750ml 2311 has been your wishlist!
Add to wishlist
Osmo Country Colour Signal Red 5ml 2311S COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Signal Red 5ml 2311 has been your wishlist!
Add to wishlist
Osmo Country Colour Signal Red 2.5L 2311D COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Signal Red 2.5L 2311 has been your wishlist!
Add to wishlist
Osmo Country Colour Signal Red 125ml 2311A COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Signal Red 125ml 2311 has been your wishlist!
Add to wishlist
Enhance Your Outdoor Wood with Osmo Country Colour Royal Blue 750ml 2506C Introducing Osmo Country Colour Royal Blue 750ml 2506C, your key to transforming and protecting your exterior wood with style and durability. Elevate the aesthetics and longevity of your outdoor wooden elements with this versatile wood finish. Key Features for Exceptional Enhancement: Highly Weather and UV Resistant: Face the most challenging weather conditions and relentless UV exposure with confidence. This finish is built to withstand the elements, ensuring your wood remains vibrant and strong. Resistant to Water and Dirt: Say goodbye to worries about water damage and dirt buildup on your outdoor wood. Osmo Country Colour provides reliable protection, preserving your wood's integrity. Reduced Wood Swelling and Shrinkage: Wood naturally expands and contracts with environmental changes. Osmo Country Colour helps minimize these effects, ensuring your wood lasts longer. Natural Wood Grain Concealed: Achieve a uniform and appealing opaque finish that conceals the natural wood grain. This imparts a consistent and fresh appearance to your wood. Microporous and Breathable Finish: Let your wood breathe while preventing issues like cracking, peeling, or flaking. This finish preserves your wood's natural beauty. Minimal Maintenance: Enjoy convenience with minimal maintenance requirements. There's no need for extensive sanding when future applications are required, saving you time and effort. A Palette of Colours: From Royal Blue to Nordic Red and beyond, Osmo Country Colour offers a wide spectrum of colours to match your creative vision and style. Versatile Finishes: Choose from finishes like Opaque White, Charcoal, Dusk Grey, and more to achieve your desired look and level of protection. Ideal for Exterior Wood Surfaces: This wood finish is tailored for exterior wood surfaces, making it perfect for decks, fences, garden furniture, and more. Coverage and Application: A little goes a long way. Each litre of Osmo Country Colour covers approximately 26 square metres with just one coat. Typically, two coats are recommended for optimal protection and appearance. The product dries in 10-12 hours, allowing your project to progress efficiently. Cleanup is a breeze with Osmo Brush Cleaner. Surface Preparation: To achieve the best results, ensure that your wood surface is clean, dry, and free from frost, with a maximum moisture content of 20%. Osmo Country Colour is ready to use and doesn't require thinning. Stir well before use, and if possible, apply the first coat to all sides of the wood for comprehensive protection. Remember to clean old stains thoroughly and remove old paints and lacquers. Safety first: wear a dust mask during sanding. For unfamiliar surfaces, a trial application is recommended. For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Applying Osmo Country Colour is straightforward. Apply it thinly and evenly along the wood grain with an Osmo Flat Brush. Allow it to dry for about 10-12 hours with proper ventilation before applying a second coat thinly. For renovation projects, one coat on the clean and dry surface is generally sufficient. Note for Extra Protection: For outdoor areas like windows and cladding that require additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's lifespan. If you're using Country Colour White 2101, please use Natural Oil Woodstain White 900. Some wood species may contain water-soluble coloured extractives that can naturally leach out when exposed to the elements. Product Benefits: Osmo Country Colour doesn't just protect your wood; it enhances and transforms it. With a wide range of vibrant colours, it's available in numerous RAL Classic and NCS colour tones, as well as options with biocidal film protection additives. This finish is meticulously designed to withstand the toughest outdoor conditions while preserving the natural beauty of wood. Caring for Your Outdoor Oasis: Regular Cleaning: Keep your outdoor space looking its best with regular damp cleaning using Osmo Decking Cleaner and the Osmo Decking Cleaning Brush. Occasional Maintenance: For those moments when your wood surfaces need some extra TLC, consider intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: When you notice signs of wear becoming visible, it's as easy as re-applying one coat onto the clean and dry surface to keep your outdoor space looking fresh and vibrant. Elevate your exterior wood surfaces with Osmo Country Colour Royal Blue 750ml 2506C. Unleash your creativity, embrace vibrant colours, and ensure long-lasting protection for your wood.
Osmo Country Colour Royal Blue 750ml 2506 has been your wishlist!
Add to wishlist
Revamp Your Wood with Osmo Country Colour Royal Blue 5ml 2506S Introducing Osmo Country Colour Royal Blue 5ml 2506S, your gateway to a world of vivid possibilities for your wooden surfaces. Elevate the aesthetic charm and durability of your exterior wooden elements with this versatile and captivating wood finish. Key Features for Exceptional Enhancement: Highly Weather and UV Resistant: Osmo Country Colour serves as your fortress against even the harshest weather conditions and relentless UV exposure. It remains robust, ensuring your wood retains its vibrancy and strength outdoors. Resistant to Water and Dirt: Enjoy peace of mind for your outdoor living spaces as this finish offers dependable protection against water and dirt. Bid farewell to concerns about wear and tear due to unpredictable weather. Reduced Wood Swelling and Shrinkage: The natural tendency of wood to swell and shrink with changing conditions is mitigated with Osmo Country Colour. This added protection ensures your wood's longevity. Natural Wood Grain Concealed: Achieve a uniform and striking opaque finish that conceals the natural wood grain. This imparts a consistent and fresh appearance to your wood. Microporous and Breathable Finish: Let your wood breathe with Osmo's microporous finish, preventing unsightly issues like cracking, peeling, or flaking while preserving its natural beauty. Minimal Maintenance: Enjoy convenience with minimal maintenance requirements. There's no need for extensive sanding when it's time for future applications, saving you valuable time and effort. A Palette of Colours: With Osmo Country Colour, you're not just preserving your wood; you're infusing it with your distinctive style. From Royal Blue to Nordic Red and beyond, there's a spectrum of colours to match your creative vision. Versatile Finishes: Choose from finishes like Opaque White, Charcoal, Dusk Grey, and more to achieve your desired look and level of protection. Ideal for Exterior Wood Surfaces: This wood finish is tailored for exterior wood surfaces, making it perfect for decks, fences, garden furniture, and more. Coverage and Application: A little goes a long way. Each litre of Osmo Country Colour covers approximately 26 square metres with just one coat. Typically, two coats are recommended for optimal protection and appearance. The product dries in 10-12 hours, allowing your project to progress efficiently. Cleanup is a breeze with Osmo Brush Cleaner. Surface Preparation: To achieve the best results, ensure that your wood surface is clean, dry, and free from frost, with a maximum moisture content of 20%. Osmo Country Colour is ready to use and doesn't require thinning. Stir well before use, and if possible, apply the first coat to all sides of the wood for comprehensive protection. Remember to clean old stains thoroughly and remove old paints and lacquers. Safety first: wear a dust mask during sanding. For unfamiliar surfaces, a trial application is recommended. For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Applying Osmo Country Colour is straightforward. Apply it thinly and evenly along the wood grain with an Osmo Flat Brush or Osmo Microfibre Roller. Allow it to dry for about 10-12 hours with proper ventilation before applying a second coat thinly. For renovation projects, one coat on the clean and dry surface is generally sufficient. Note for Extra Protection: For outdoor areas like windows and cladding that require additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's lifespan. If you're using Country Colour White 2101, please use Natural Oil Woodstain White 900. Some wood species may contain water-soluble coloured extractives that can naturally leach out when exposed to the elements. Product Benefits: Osmo Country Colour doesn't just protect your wood; it enhances and transforms it. With a wide range of vibrant colours, it's available in numerous RAL Classic and NCS colour tones, as well as options with biocidal film protection additives. This finish is meticulously designed to withstand the toughest outdoor conditions while preserving the natural beauty of wood. Caring for Your Outdoor Oasis: Regular Cleaning: Keep your outdoor space looking its best with regular damp cleaning using Osmo Decking Cleaner and the Osmo Decking Cleaning Brush. Occasional Maintenance: For those moments when your wood surfaces need some extra TLC, consider intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: When you notice signs of wear becoming visible, it's as easy as re-applying one coat onto the clean and dry surface to keep your outdoor space looking fresh and vibrant. Elevate your exterior wood surfaces with Osmo Country Colour Royal Blue 5ml 2506S. Unleash your creativity, embrace vibrant colours, and ensure long-lasting protection for your wood.
Osmo Country Colour Royal Blue 5ml 2506 has been your wishlist!
Add to wishlist
Elevate Your Exterior Wood Surfaces with Osmo Country Colour Royal Blue 2.5L 2506D When it comes to enhancing both the aesthetics and durability of your outdoor wooden elements, Osmo Country Colour Royal Blue 2.5L 2506D stands as a versatile and vibrant choice. Discover the diverse benefits that this wood finish offers to protect and elevate your exterior wood surfaces. Key Features for Ultimate Protection: Extremely Weather and UV Resistant: Osmo Country Colour excels in challenging weather conditions and under the relentless gaze of the sun. Its exceptional weather and UV resistance ensure that your wood surfaces remain robust and vibrant, even in the harshest outdoor environments. Water and Dirt Resistant: Maintain the natural beauty and integrity of your wood as this finish offers reliable protection against water and dirt. Say goodbye to worries about weather-induced wear and tear. Wood Swelling and Shrinkage Reduction: Wood surfaces are prone to swelling and shrinking due to changing environmental conditions. Osmo Country Colour helps minimize these fluctuations, ensuring long-lasting performance and structural integrity. Natural Wood Grain Concealed: Enjoy an opaque finish that conceals the wood's natural grain. This creates a stunningly uniform appearance across your outdoor wood surfaces. Microporous and Breathable Finish: Breathe new life into your wood with a microporous finish that allows it to respire while preventing issues like unsightly cracking, peeling, or flaking. Minimal Maintenance: Embrace convenience with minimal maintenance requirements. No more extensive sanding when future applications are needed, saving you time and effort. Vibrant Colour Palette: With a captivating colour palette that includes shades like Royal Blue, Sunflower Yellow, and Nordic Red, you have the freedom to infuse your outdoor space with your unique style. Osmo Country Colour offers an array of colors to suit your creative vision. Versatile Finishes: Choose from finishes like Opaque White, Charcoal, Dusk Grey, and more to achieve your desired look and protection level. Perfect for Exterior Wood Surfaces: This wood finish is specifically designed for exterior wood surfaces, making it an ideal choice for decks, fences, garden furniture, and more. Coverage and Application: Each liter of Osmo Country Colour covers approximately 26 square meters with just one coat. Typically, two coats are recommended for optimal protection and appearance. The product dries in 10-12 hours, ensuring your project progresses efficiently. Cleanup is a breeze with Osmo Brush Cleaner. Surface Preparation: To achieve the best results, ensure that your wood surface is clean, dry, and free from frost, with a maximum moisture content of 20%. Osmo Country Colour is ready to use and doesn't require thinning. Stir well before use, and if possible, apply the first coat to all sides of the wood for comprehensive protection. Remember to clean old stains thoroughly and remove old paints and lacquers. Safety first: wear a dust mask during sanding. For unfamiliar surfaces, a trial application is recommended. For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Application is a straightforward process. Apply Osmo Country Colour thinly and evenly along the wood grain with an Osmo Flat Brush or Osmo Microfibre Roller. Allow it to dry for about 10-12 hours with proper ventilation before applying a second coat thinly. For renovation projects, one coat on the clean and dry surface is generally sufficient. Note for Extra Protection: For outdoor areas like windows and cladding that require additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's lifespan. If you're using Country Colour White 2101, please use Natural Oil Woodstain White 900. Some wood species may contain water-soluble colored extractives that can naturally leach out when exposed to the elements. Product Benefits: Osmo Country Colour is more than just a wood finish; it's a reliable protector and a canvas for your creativity. With a wide range of vibrant color options, it's available in numerous RAL Classic and NCS color tones, as well as options with biocidal film protection additives. This finish is meticulously designed to withstand the toughest outdoor conditions while preserving the natural beauty of wood. Caring for Your Outdoor Oasis: Regular Cleaning: Keep your outdoor space looking its best with regular damp cleaning using Osmo Decking Cleaner and the Osmo Decking Cleaning Brush. Occasional Maintenance: For those moments when your wood surfaces need some extra TLC, consider intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: When you notice signs of wear becoming visible, it's as easy as re-applying one coat onto the clean and dry surface to keep your outdoor space looking fresh and vibrant. Elevate your outdoor oasis with Osmo Country Colour Royal Blue 2.5L 2506D, a vibrant and durable wood finish designed to protect and enhance your exterior wood surfaces. Experience the beauty of color and the confidence of long-lasting protection.
Osmo Country Colour Royal Blue 2.5L 2506 has been your wishlist!
Add to wishlist
Revive Your Exterior Wood with Osmo Country Colour Royal Blue 125ml 2506A Introducing Osmo Country Colour Royal Blue 125ml 2506A, your ticket to breathing new life into your outdoor wood while providing it with top-notch protection. Enhance the aesthetics and durability of your exterior wooden elements with this versatile wood finish. Key Features for Exceptional Enhancement: Highly Weather and UV Resistant: Take on the harshest weather conditions and relentless UV exposure with confidence. This finish is engineered to withstand the elements, ensuring your wood remains vibrant and strong. Resistant to Water and Dirt: Bid farewell to concerns about water damage and dirt buildup on your outdoor wood. Osmo Country Colour delivers reliable protection, preserving your wood's integrity. Reduced Wood Swelling and Shrinkage: Wood naturally expands and contracts with changes in the environment. Osmo Country Colour helps minimize these effects, guaranteeing your wood's long-lasting performance. Natural Wood Grain Concealed: Achieve a uniform and attractive opaque finish that conceals the natural wood grain. This imparts a consistent and fresh appearance to your wood. Microporous and Breathable Finish: Allow your wood to breathe while preventing issues like cracking, peeling, or flaking. This finish preserves your wood's innate beauty. Minimal Maintenance: Enjoy convenience with minimal maintenance requirements. No extensive sanding is needed when future applications are required, saving you time and effort. A Palette of Colours: From Royal Blue to Nordic Red and beyond, Osmo Country Colour offers a wide spectrum of colours to match your creative vision and style. Versatile Finishes: Choose from finishes like Opaque White, Charcoal, Dusk Grey, and more to achieve your desired look and level of protection. Ideal for Exterior Wood Surfaces: This wood finish is tailored for exterior wood surfaces, making it perfect for decks, fences, garden furniture, and more. Coverage and Application: A little goes a long way. Each litre of Osmo Country Colour covers approximately 26 square metres with just one coat. Typically, two coats are recommended for optimal protection and appearance. The product dries in 10-12 hours, allowing your project to progress efficiently. Cleanup is a breeze with Osmo Brush Cleaner. Surface Preparation: To achieve the best results, ensure that your wood surface is clean, dry, and free from frost, with a maximum moisture content of 20%. Osmo Country Colour is ready to use and doesn't require thinning. Stir well before use, and if possible, apply the first coat to all sides of the wood for comprehensive protection. Remember to clean old stains thoroughly and remove old paints and lacquers. Safety first: wear a dust mask during sanding. For unfamiliar surfaces, a trial application is recommended. For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Applying Osmo Country Colour is straightforward. Apply it thinly and evenly along the wood grain with an Osmo Flat Brush. Allow it to dry for about 10-12 hours with proper ventilation before applying a second coat thinly. For renovation projects, one coat on the clean and dry surface is generally sufficient. Note for Extra Protection: For outdoor areas like windows and cladding that require additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's lifespan. If you're using Country Colour White 2101, please use Natural Oil Woodstain White 900. Some wood species may contain water-soluble coloured extractives that can naturally leach out when exposed to the elements. Product Benefits: Osmo Country Colour doesn't just protect your wood; it enhances and transforms it. With a wide range of vibrant colours, it's available in numerous RAL Classic and NCS colour tones, as well as options with biocidal film protection additives. This finish is meticulously designed to withstand the toughest outdoor conditions while preserving the natural beauty of wood. Caring for Your Outdoor Oasis: Regular Cleaning: Keep your outdoor space looking its best with regular damp cleaning using Osmo Decking Cleaner and the Osmo Decking Cleaning Brush. Occasional Maintenance: For those moments when your wood surfaces need some extra TLC, consider intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: When you notice signs of wear becoming visible, it's as easy as re-applying one coat onto the clean and dry surface to keep your outdoor space looking fresh and vibrant. Revitalize your exterior wood surfaces with Osmo Country Colour Royal Blue 125ml 2506A. Unleash your creativity, embrace vibrant colours, and ensure long-lasting protection for your wood.
Osmo Country Colour Royal Blue 125ml 2506 has been your wishlist!
Add to wishlist
Osmo Country Colour Pebble Grey 750ml 2708C: Premium Wood Finish for Exterior Surfaces Experience the vibrant and protective properties of Osmo Country Colour in Pebble Grey, a versatile shade perfect for your exterior wood surfaces. Here are the details you need: Key Features: Extreme Weather and UV Resistance: Withstand the harshest outdoor conditions while preserving your wood surfaces. Exceptional Water and Dirt Resistance: Keep your wood looking pristine by defending against water damage and dirt accumulation. Minimizes Wood Swelling and Shrinking: Prevents natural wood expansion and contraction due to changes in humidity. Natural Wood Grain Concealment: Achieve an opaque finish while still showcasing the inherent beauty of wood. Breathable and Crack-Resistant: This microporous finish allows your wood to breathe while resisting cracks, peels, and flakes. Low Maintenance: No extensive sanding required for future applications. Available Colors: Pebble Grey: A versatile color suitable for various exterior projects. Application Tools: Use an Osmo Flat Brush or Osmo Microfibre Roller for precise and easy application. Recommended Use: Ideal for exterior wood surfaces, including cladding, windows, garden furniture, and garden houses. Recoat: Generally, a single coat is sufficient, but you can apply a new coat when you notice signs of wear. Sizes: Available in a 750ml container. Dry Time: Allow approximately 10-12 hours for drying under good ventilation. Clean Up: Use Osmo Brush Cleaner for easy cleanup. Coverage: Achieve excellent coverage at 26m² per liter with one coat. Number of Coats: Usually, two coats are recommended for optimal results. Surface Preparation: Ensure your wood surface is clean, dry, and frost-free (moisture content should be below 20%). Osmo Country Colour is ready to use, so do not thin it. Make sure to stir it well before application. If possible, apply the first coat to all sides before installation. Thoroughly clean old microporous stains, and remove any old paints or lacquers. For safety, wear a dust mask during sanding works. Keep in mind that the final finish can be influenced by various factors, including the wood's condition, so a trial application is recommended. Additional Protection: For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Apply Osmo Country Colour thinly and evenly to the clean and dry wood along the wood grain, spreading it well. Allow it to dry for approximately 10-12 hours under good ventilation. After drying, apply a second coat, again thinly. For renovation projects, one coat on a clean and dry surface is typically sufficient. Note: For outdoor areas like windows and cladding that require extra protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's life. While Osmo Country Colour offers a variety of colors, starting from 2.5 liters per color tone, it's also available in 186 RAL Classic and 1950 NCS color tones, along with biocidal film protection additives. Keep in mind that some wood species may contain water-soluble colored extractives, which can naturally leach out when weathered. Using power washers may reduce the finish's coverage, and general or multi-purpose cleaners could increase the frequency of maintenance and recoating. Care: Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using an Osmo Decking Cleaning Brush. Occasional Maintenance: If needed, perform intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Elevate your exterior wood surfaces with the protection and style of Osmo Country Colour Pebble Grey in a convenient 750ml container.
Osmo Country Colour Pebble Grey 750ml 2708 has been your wishlist!
Add to wishlist
Osmo Country Colour Pebble Grey 5ml 2708S: The Perfect Sample for Your Project Experience the versatility and quality of Osmo Country Colour with this 5ml sample in Pebble Grey. Discover why this product is a popular choice for exterior wood surfaces. Key Features: Extreme Weather and UV Resistance: This finish can handle the toughest outdoor conditions while protecting your wood surfaces. Excellent Water and Dirt Resistance: Keep your wood clean and protected from water damage and dirt buildup. Minimizes Wood Swelling and Shrinking: Prevents natural wood expansion and contraction due to humidity changes. Conceals Natural Wood Grain: Achieve an opaque finish while preserving the wood's inherent beauty. Breathable and Crack-Resistant: This microporous finish allows your wood to breathe while resisting cracks, peels, and flakes. Easy Maintenance: No need for extensive sanding when reapplying in the future. Available Colors: Pebble Grey: A versatile choice suitable for various exterior projects. Application Tools: Use an Osmo Flat Brush or Osmo Microfibre Roller for precise and easy application. Recommended Use: Ideal for exterior wood surfaces, including cladding, windows, garden furniture, and garden houses. Recoat: Typically, a single coat is sufficient, but you can apply a new coat when you notice signs of wear. Sizes: Sample size: 5ml Dry Time: Allow approximately 10-12 hours for drying under good ventilation. Clean Up: Use Osmo Brush Cleaner for easy cleanup. Coverage: Achieve excellent coverage at 26m² per liter with one coat. Number of Coats: Usually, two coats are recommended for optimal results. Surface Preparation: Ensure your wood surface is clean, dry, and frost-free (moisture content should be below 20%). Osmo Country Colour is ready to use, so do not thin it. Make sure to stir it well before application. If possible, apply the first coat to all sides before installation. Thoroughly clean old microporous stains, and remove any old paints or lacquers. Wear a dust mask during sanding works for safety. Keep in mind that the final finish can be influenced by various factors, including the wood's condition, so a trial application is recommended. Additional Protection: For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Apply Osmo Country Colour thinly and evenly to the clean and dry wood along the wood grain, spreading it well. Allow it to dry for approximately 10-12 hours under good ventilation. After drying, apply a second coat, again thinly. For renovation projects, one coat on a clean and dry surface is typically sufficient. Note: For outdoor areas like windows and cladding that require extra protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's life. While Osmo Country Colour offers a variety of colors, starting from 2.5 liters per color tone, it's also available in 186 RAL Classic and 1950 NCS color tones, along with biocidal film protection additives. Keep in mind that some wood species may contain water-soluble colored extractives, which can naturally leach out when weathered. Using power washers may reduce the finish's coverage, and general or multi-purpose cleaners could increase the frequency of maintenance and recoating. Care: Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using an Osmo Decking Cleaning Brush. Occasional Maintenance: If needed, perform intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Experience the excellence of Osmo Country Colour Pebble Grey with this convenient 5ml sample for your project needs.
Osmo Country Colour Pebble Grey 5ml 2708 has been your wishlist!
Add to wishlist
Osmo Country Colour Pebble Grey 2.5L 2708D: Elevate Your Exterior Wood Discover the transformative power of Osmo Country Colour Pebble Grey 2.5L 2708D, a weather-resistant, UV-resistant, and water-repellent wood finish that takes your exterior wood surfaces to the next level. Key Features: Extreme Weather and UV Resistance: This product is engineered to withstand the harshest outdoor conditions, ensuring your wood remains protected and beautiful. Superior Water and Dirt Resistance: Say goodbye to water damage and dirt buildup; Osmo Country Colour keeps your wood surfaces clean and pristine. Minimizes Wood Swelling and Shrinking: It helps prevent the natural expansion and contraction of wood due to humidity changes. Conceals Natural Wood Grain: Achieve a uniform, opaque finish while preserving the wood's natural character. Breathable and Crack-Resistant: This microporous finish allows your wood to breathe while resisting cracks, peels, and flakes. Easy Maintenance: No need for time-consuming sanding when reapplying in the future. Available Colors: Pebble Grey: Elegant and versatile, it's perfect for modern and traditional exteriors alike. Application Tools: Use an Osmo Flat Brush or Osmo Microfibre Roller for easy and precise application. Recommended Use: Ideal for exterior wood surfaces, including cladding, windows, garden furniture, and garden houses. Recoat: A single coat is typically sufficient, but you can apply a new coat when signs of wear become visible. Sizes: Available in 5ml, 125ml, 750ml, and 2.5L containers to suit your project's needs. Dry Time: Allow approximately 10-12 hours for drying under good ventilation. Clean Up: Use Osmo Brush Cleaner for easy cleanup. Coverage: Expect excellent coverage at 26m² per liter with one coat. Number of Coats: Usually, two coats are recommended for optimal results. Surface Preparation: Ensure your wood surface is clean, dry, and frost-free (moisture content should be below 20%). Osmo Country Colour is ready to use, so do not thin it. Make sure to stir it well before application. If possible, apply the first coat to all sides before installation. Thoroughly clean old microporous stains, and remove any old paints or lacquers. Wear a dust mask during sanding works for safety. Keep in mind that the final finish can be influenced by various factors, including the wood's condition, so a trial application is recommended. Additional Protection: For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Apply Osmo Country Colour thinly and evenly to the clean and dry wood along the wood grain, spreading it well. Allow it to dry for approximately 10-12 hours under good ventilation. After drying, apply a second coat, again thinly. For renovation projects, one coat on a clean and dry surface is typically sufficient. Note: For outdoor areas like windows and cladding that require extra protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's life. While Osmo Country Colour offers a variety of colors, starting from 2.5 liters per color tone, it's also available in 186 RAL Classic and 1950 NCS color tones, along with biocidal film protection additives. Keep in mind that some wood species may contain water-soluble colored extractives, which can naturally leach out when weathered. Using power washers may reduce the finish's coverage, and general or multi-purpose cleaners could increase the frequency of maintenance and recoating. Care: Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using an Osmo Decking Cleaning Brush. Occasional Maintenance: If needed, perform intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Transform your exterior wood with Osmo Country Colour Pebble Grey 2.5L 2708D. Enjoy superior protection, lasting beauty, and easy maintenance for your outdoor wood projects.
Osmo Country Colour Pebble Grey 2.5L 2708 has been your wishlist!
Add to wishlist
Osmo Country Colour Pebble Grey 125ml 2708A: Premium Wood Finish for Exterior Surfaces Explore the versatile and protective Osmo Country Colour in Pebble Grey, ideal for your exterior wood projects. Here are the essential details: Key Features: Extreme Weather and UV Resistance: Ensure your wood surfaces can withstand harsh outdoor conditions and remain vibrant. Impressive Water and Dirt Resistance: Keep your wood looking clean by protecting it from water damage and dirt buildup. Minimizes Wood Swelling and Shrinking: Prevent natural wood expansion and contraction caused by humidity changes. Conceals Natural Wood Grain: Achieve an opaque finish while preserving the inherent beauty of wood. Breathable and Crack-Resistant: This microporous finish allows your wood to breathe while resisting cracks, peels, and flakes. Low Maintenance: No extensive sanding required for future applications. Available Colors: Pebble Grey: A versatile color suitable for various exterior projects. Application Tools: Use an Osmo Flat Brush or Osmo Microfibre Roller for precise and easy application. Recommended Use: Ideal for exterior wood surfaces, including cladding, windows, garden furniture, and garden houses. Recoat: Typically, one coat is sufficient, but apply a new coat when you notice signs of wear. Sizes: Available in a 125ml container. Dry Time: Allow approximately 10-12 hours for drying under good ventilation. Clean Up: Use Osmo Brush Cleaner for easy cleanup. Coverage: Achieve excellent coverage at 26m² per liter with one coat. Number of Coats: Usually, two coats are recommended for optimal results. Surface Preparation: Ensure your wood surface is clean, dry, and frost-free (moisture content should be below 20%). Osmo Country Colour is ready to use, so do not thin it. Make sure to stir it well before application. If possible, apply the first coat to all sides before installation. Thoroughly clean old microporous stains, and remove any old paints or lacquers. For safety, wear a dust mask during sanding works. Keep in mind that the final finish can be influenced by various factors, including the wood's condition, so a trial application is recommended. Additional Protection: For added protection against blue stain, rot, and insects, consider pre-treating the wood on all sides with Osmo WR Base Coat. Method of Application: Apply Osmo Country Colour thinly and evenly to the clean and dry wood along the wood grain, spreading it well. Allow it to dry for approximately 10-12 hours under good ventilation. After drying, apply a second coat, again thinly. For renovation projects, one coat on a clean and dry surface is typically sufficient. Note: For outdoor areas like windows and cladding that require extra protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thorough drying. This safeguards against dirt contamination and extends the finish's life. While Osmo Country Colour offers a variety of colors, starting from 2.5 liters per color tone, it's also available in 186 RAL Classic and 1950 NCS color tones, along with biocidal film protection additives. Keep in mind that some wood species may contain water-soluble colored extractives, which can naturally leach out when weathered. Using power washers may reduce the finish's coverage, and general or multi-purpose cleaners could increase the frequency of maintenance and recoating. Care: Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using an Osmo Decking Cleaning Brush. Occasional Maintenance: If needed, perform intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Enhance the protection and aesthetics of your exterior wood surfaces with Osmo Country Colour Pebble Grey in a convenient 125ml container.
Osmo Country Colour Pebble Grey 125ml 2708 has been your wishlist!
Add to wishlist
Osmo Country Colour Nordic Red 750ml 2308C COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Nordic Red 750ml 2308 has been your wishlist!
Add to wishlist
  • 1
  • 2
  • 3
  • 4
  • Next
  • Showing 1 - 24 of 74 results

© Eakers DIY 2024.
Online Shop Builder & ePOS System by ShopTill-e.com