Osmo Wood Stain

Osmo Wood Stain

Osmo Wood Stain is a high-quality and versatile product designed to enhance the natural beauty of wood. It is an ideal choice for those who want to add colour and depth to their interior or exterior wood surfaces, while still preserving the wood's natural texture and grain.

Osmo Wood Stain is available in a range of rich and vibrant colours, from classic wood tones to bold and modern shades. The product is designed to be easy to use and offers excellent coverage, allowing you to achieve a professional-looking finish quickly and efficiently.

The unique formula of Osmo Wood Stain combines natural oils and pigments, providing superior protection against water, dirt, and UV damage. The product is also microporous, allowing the wood to breathe while still providing an effective barrier against moisture and environmental factors.

Whether you're looking to refresh the look of your deck, garden furniture, or interior woodwork, Osmo Wood Stain offers a durable and long-lasting solution. It is suitable for use on all types of wood, including softwoods and hardwoods, and can be applied using a brush, roller, or spray gun.

Overall, Osmo Wood Stain is an excellent choice for those who want to add colour and protection to their wood surfaces while still maintaining their natural beauty and texture. Its versatility and ease of use make it a top choice for both professional and DIY users alike.


Filter results

Osmo Opaque Gloss Woodstain White 750ml 2104C WHITE GLOSS FRAMING Extremely weather and UV resistant Suitable for interior and exterior framework Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2104 WHITE, GLOSS FINISHES White Gloss APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Interior and exterior wood frames RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 20m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Opaque Gloss Wood Stain is ready to use. Do not thin. Stir well. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE When used in dark indoor areas, the coating has due to its high oil content a slight yellowing effect. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Spray-Cleaner. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Opaque Gloss Woodstain White 750ml 2104 has been your wishlist!
Add to wishlist
Osmo Opaque Gloss Wood Stain White 5ml 2104S WHITE GLOSS FRAMING Extremely weather and UV resistant Suitable for interior and exterior framework Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2104 WHITE, GLOSS FINISHES White Gloss APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Interior and exterior wood frames RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 20m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Opaque Gloss Wood Stain is ready to use. Do not thin. Stir well. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE When used in dark indoor areas, the coating has due to its high oil content a slight yellowing effect. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning:  Damp cleaning with Osmo Spray-Cleaner. Occasional Maintenance:  If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Opaque Gloss Wood Stain White 5ml 2104 has been your wishlist!
Add to wishlist
Osmo Oil Stain White 5ml 3501S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain White 5ml 3501 has been your wishlist!
Add to wishlist
Osmo Oil Stain White 2.5L 3501D THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain White 2.5L 3501 has been your wishlist!
Add to wishlist
Osmo Oil Stain White 1L 3501 THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain White 1L 3501 has been your wishlist!
Add to wishlist
Osmo Oil Stain White 125ml 3501A: The Ultimate Solution for Professionals If you're seeking the quickest, most durable, and hardwearing solution for your interior wooden flooring and furniture, look no further than Osmo Oil Stain White 125ml 3501A. This remarkable product offers a host of features that make it the go-to choice for professionals and enthusiasts alike. Here's why it's your ultimate solution: Key Features: Exceptional Speed and Durability: Osmo Oil Stain is specially formulated for fast drying and curing, ensuring your projects are completed swiftly. Its extreme durability and hardwearing nature guarantee long-lasting results. Water and Dirt Resistance: Enjoy the peace of mind that comes with very high water and dirt resistance. Your surfaces remain protected against everyday challenges, maintaining their pristine appearance. Attractive Color Tones: Osmo Oil Stain offers a range of attractive color tones, whether you prefer a transparent finish or an intensive one. Achieve the look you desire with ease. Commercial Use: Specifically designed for commercial applications, this product is engineered to meet the demanding needs of professionals. Universal Application: Suitable for all types of woods, including exotic varieties, it's your one-stop solution for a wide range of wooden surfaces. Resists Liquid Spillages: This stain is resistant to common liquid spillages such as water, juice, tea, cola, and wine. It's also saliva-resistant and sweatproof, making it suitable for children's toys. Microporous and Breathable: The microporous finish allows the wood to breathe while preventing issues like cracking, peeling, or flaking. No Sanding Necessary: For spot repairs or future applications, you won't need to go through the hassle of sanding. This product simplifies maintenance. Available Colors: 3501 White 3512 Silver Grey 3514 Graphite 3516 Jatoba 3518 Light Grey 3519 Natural 3541 Havanna 3543 Cognac 3564 Tobacco 3590 Black Recommended Use: Ideal for interior wooden flooring and furniture, this product ensures a stunning finish that lasts. Recoat: When signs of wear become visible, a single coat is all you need to refresh your surfaces. Sizes Available: Choose from 5ml, 125ml, 1L, or 2.5L, depending on the scope of your projects. Dry Time: With Oil Stain Hardener, expect a quick 4-hour drying time. Without it, allow 12 hours for complete drying. Clean Up: Cleaning up after your project is effortless with Osmo Brush Cleaner. Coverage: Achieve impressive coverage of 24-48m² per litre with just one coat. Coats: Typically, one to two coats are sufficient, followed by a top coat of Polyx Oil for optimal results. Care: Maintain your surfaces with Osmo Wash and Care or Spray-Mop for regular cleaning. Occasional maintenance is simple with Osmo Liquid Wax Cleaner or Maintenance Oil. Surface Preparation: Ensure your wood surfaces are clean, dry, and frost-free. Remove old microporous stains, paints, and lacquers thoroughly. Sand carefully, and fill any cracks or holes with Osmo Wood Filler. A trial application is recommended, especially for unfamiliar surfaces. Method of Application: Transparent color tones can be applied thinly and evenly along the wood grain using Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece, or Double Blade Scraper. For intensive color, apply thinly along the grain and spread well. Ventilate well while drying. Note: Dark woods and hardwoods rich in extractives may require different products like Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx-Oil 2K Pure. A trial application is advised. For a truly white surface, consider pigmented Polyx-Oils. Experience the quick cure for professionals with Osmo Oil Stain White 125ml 3501A. Elevate your woodworking projects and enjoy the durability, ease of use, and stunning results this product delivers. Your surfaces will thank you for it.
Osmo Oil Stain White 125ml 3501 has been your wishlist!
Add to wishlist
Osmo Oil Stain Tobacco 5ml 3564S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Tobacco 5ml 3564 has been your wishlist!
Add to wishlist
Osmo Oil Stain Tabac 2.5L 3564D THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Tabac 2.5L 3564 has been your wishlist!
Add to wishlist
Osmo Oil Stain Tabac 1L 3564 THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Tabac 1L 3564 has been your wishlist!
Add to wishlist
Osmo Oil Stain Silver Grey 5ml 3512S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Silver Grey 5ml 3512 has been your wishlist!
Add to wishlist
Osmo Oil Stain Silver Grey 2.5L 3512D THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Silver Grey 2.5L 3512 has been your wishlist!
Add to wishlist
Osmo Oil Stain Silver Grey 1L 3512 THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Silver Grey 1L 3512 has been your wishlist!
Add to wishlist
Osmo Oil Stain Natural 5ml 3519S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Natural 5ml 3519 has been your wishlist!
Add to wishlist
Osmo Oil Stain Natural 2.5L 3519D THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Natural 2.5L 3519 has been your wishlist!
Add to wishlist
Osmo Oil Stain Natural 1L 3519 THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Natural 1L 3519 has been your wishlist!
Add to wishlist
Osmo Oil Stain Light Grey 5ml 3518S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Light Grey 5ml 3518 has been your wishlist!
Add to wishlist
Osmo Oil Stain Light Grey 2.5L 3518D THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Light Grey 2.5L 3518 has been your wishlist!
Add to wishlist
Osmo Oil Stain Light Grey 1L 3518 - Quick Cure for Professionals Elevate Your Woodwork with Osmo's Fast-Drying and Durable Oil Stain Transform your wood surfaces with Osmo Oil Stain - Order Now for Quick and Lasting Results! Osmo Oil Stain 3518: The Ultimate Solution for Professionals When it comes to woodwork, professionals demand not just quality but also efficiency. That's where Osmo Oil Stain 3518 shines. It's the go-to choice for those who want exceptionally fast drying, long-lasting results, and a finish that stands the test of time. Exceptional Speed and Durability Osmo Oil Stain 3518 is specially formulated for professionals who require speed without compromising on quality. It dries and cures at an impressive rate, allowing you to move on to the next stage of your project swiftly. But don't let its speed fool you; it's built to last. This oil stain is extremely durable and hardwearing, ensuring your woodwork remains pristine for years to come. Resistant to the Elements Whether your woodwork is indoors or exposed to the elements, Osmo Oil Stain 3518 has you covered. It's highly water and dirt resistant, making it suitable for various applications. From furniture to flooring, Osmo Oil Stain 3518 provides a protective barrier that keeps your wood looking its best, no matter what challenges it faces. A Palette of Attractive Tones Choose from a range of attractive colour tones, from transparent to intensive, allowing you to achieve the desired look for your project. Whether you're aiming for a subtle enhancement or a bold statement, Osmo Oil Stain 3518 provides the versatility you need. Versatile Application Osmo Oil Stain 3518 is specifically designed for commercial use, making it perfect for professionals in various industries. It's suitable for all wood types, including exotic woods. Plus, it's resistant to common liquid spillages like water, juice, tea, cola, and even wine. It's even saliva-resistant and sweatproof, making it suitable for children's toys. Breathable Finish That Lasts One of the key benefits of Osmo Oil Stain 3518 is its microporous, breathable finish. Unlike some finishes that can crack, peel, or flake over time, Osmo's unique formula ensures that your woodwork remains flawless. It won't hinder your wood's natural ability to breathe, maintaining its integrity. Easy Maintenance With Osmo Oil Stain 3518, maintenance is a breeze. No need for extensive sanding between applications; spot repairs and future applications are hassle-free. Discover the Osmo Difference Osmo offers a range of stunning colour tones, including Light Grey (3518) and others like Silver Grey (3512) and Jatoba (3516). It's suitable for interior wooden flooring and furniture, adding a touch of elegance to your spaces. Order Your Osmo Oil Stain Today Transform your woodwork with Osmo Oil Stain 3518. It's the quick cure for professionals who demand nothing but the best. Order now and experience the difference that Osmo brings to your wood projects. Your craftsmanship deserves Osmo.
Osmo Oil Stain Light Grey 1L 3518 has been your wishlist!
Add to wishlist
Osmo Oil Stain Jatoba 5ml 3516S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Jatoba 5ml 3516 has been your wishlist!
Add to wishlist
Osmo Oil Stain Jatoba 2.5L 3516D THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Jatoba 2.5L 3516 has been your wishlist!
Add to wishlist
Osmo Oil Stain Jatoba 1L 3516 THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Jatoba 1L 3516 has been your wishlist!
Add to wishlist
Osmo Oil Stain Havanna 5ml 3541S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Havanna 5ml 3541 has been your wishlist!
Add to wishlist
Osmo Oil Stain Havanna 2.5L 3541D THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Havanna 2.5L 3541 has been your wishlist!
Add to wishlist
Osmo Oil Stain Havanna 1L 3541 THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Oil Stain Havanna 1L 3541 has been your wishlist!
Add to wishlist
  • 1
  • 2
  • Next
  • Showing 1 - 24 of 32 results

© Eakers DIY 2024.
Online Shop Builder & ePOS System by ShopTill-e.com