Osmo Oil Stain Havanna 5ml 3541

£1.30

Osmo Oil Stain Havanna 5ml 3541

Osmo Oil Stain Havanna 5ml 3541

£1.30

Osmo Oil Stain Havanna 5ml 3541S

THE QUICK CURE FOR PROFESSIONALS

  1. Especially fast drying and curing
  2. Extremely durable and hardwearing
  3. Very water and dirt resistant
  4. Attractive colour tones, transparent or intensive
  5. Specifically for commercial use
  6. Suitable for all woods including exotic woods
  7. Resistant to common liquid spillages such as water, juice, tea, cola and wine
  8. Saliva-resistant and sweatproof, suitable for children’s toys
  9. Microporous, breathable finish which does not crack, peel or flake
  10. No sanding necessary for spot repairs or future applications

3501 WHITE

3512 SILVER GREY

3514 GRAPHITE

3516 JATOBA

3518 LIGHT GREY

3519 NATURAL

3541 HAVANNA

3543 COGNAC

3564 TOBACCO

3590 BLACK

FINISHES

Colours (Satin)

APPLICATION TOOL

Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad

RECOMMENDED USE

Interior wooden flooring and furniture

RECOAT

One coat, when signs of wear become visible

SIZES

5ml, 125ml, 1L, 2.5L

DRY TIME

4 hrs with Oil Stain Hardener, 12 hrs without

CLEAN UP

Osmo Brush Cleaner

COVERAGE

24-48m²/L with one coat

COATS

1-2 coats, plus top coat of Polyx Oil

CARE

Osmo Wash and Care, or Spray-Mop

SURFACE PREPARATION

Wood surface must be clean, dry and frost-free (moisture content max. 18%).
Osmo Oil Stain is ready to use. Do not thin. Stir well before use.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

METHOD OF APPLICATION

Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation.

Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad.

Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad.
After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil.
For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth.

NOTE

Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option.
Please observe the instructions for a correct application.

For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended.

Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended.

Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush.
After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species.

Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage.

CARE

Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.

Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.

Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.