Osmo Country Colour Medium Brown 5ml 2606

£1.30

Osmo Country Colour Medium Brown 5ml 2606

Osmo Country Colour Medium Brown 5ml 2606

£1.30

Osmo Country Colour Medium Brown 5ml 2606S

COLOURFUL DIVERSITY

  1. Extremely weather and UV resistant
  2. Very water and dirt resistant
  3. Reduces wood swelling and shrinkage
  4. Natural wood grain is hidden
  5. Microporous, breathable finish which does not crack, peel or flake
  6. No sanding necessary for future applications

2101 WHITE

  • 2203 LIGHT OCHRE
  • 2204 IVORY
  • 2205 SUNFLOWER YELLOW
  • 2308 NORDIC RED
  • 2310 CEDAR/REDWOOD
  • 2311 SIGNAL RED
  • 2404 FIR GREEN
  • 2501 LABRADOR BLUE
  • 2506 ROYAL BLUE
  • 2507 DOVE BLUE
  • 2606 MEDIUM BROWN
  • 2607 DARK BROWN
  • 2703 CHARCOAL
  • 2704 DUSK GREY
  • 2708 PEBBLE GREY
  • 2716 ANTHRACITE GREY
  • 2735 LIGHT GREY
  • 2742 TRAFFIC GREY

FINISHES

Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey

APPLICATION TOOL

Osmo Flat Brush or Osmo Microfibre Roller

RECOMMENDED USE

Exterior wood surfaces

RECOAT

One coat, when signs of wear become visible

SIZES

5ml, 125ml, 750ml, 2.5L

DRY TIME

10-12 hours

CLEAN UP

Osmo Brush Cleaner

COVERAGE

26m²/L with one coat

COATS

2 coats

CARE

Osmo Spray Cleaner (Exterior)

SURFACE PREPARATION

Wood surface must be clean, dry and frost-free (moisture content max. 20%).
Osmo Country Colour is ready to use. Do not thin. Stir well before use.
If possible, please apply the first coat to all sides before installation.
Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.
As a general rule, wear a dust mask during sanding works.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.

METHOD OF APPLICATION

With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.
Allow to dry for approx. 10-12 hours under good ventilation.
After drying, apply a second coat – also thinly.
For renovation works, one coat applied to the clean and dry surface is usually sufficient.

NOTE

If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900.
Country Colour, which has been trusted for over decades, is also available in the colour of your choice.
Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives.
Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.

Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.

CARE

Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.

Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.

Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.