Mangers Paint and Varnish Remover

Mangers Paint & Varnish Stripper

Instructions For Use

Shake container well before use. Ensure there is adequate ventilation when working.

Wear protective gloves.

Pour a quantity of paint and varnish stripper into a suitable container.

Apply a generous even coat (do not brush out) on to the surface to be stripped with a suitable brush, leave for approximately 30 minutes and apply a second coat.

For areas where there are less than 5 layers of paint or varnish, a second coatmay be necessary.

Once the stripper has penetrated to the substrate, scrape off' leaving surface as clean as posible.

Rub dowm stripped area using a scrubbing bruh or stainless steel pad and water.

Rinse with water and allow to dry.

is an extremely effective non methylene chloride paint stripper ideal for use by professionaol and non professional users. The non caustic non flammable formulation is simple and easy to use both indoors and out. With its non drip formulation and minimal evaporation it clings 100% to vertical surfaces ebsuring there is minimal waste.