Hardware, Paint, Plumbing, Electrical, Timbers and Lots more...
Call us: +44 1363 775555
5% Discount for New Customers Use Code - DISCOUNT1 - at Checkout
Personna Plastic Mini Scraper + 1 Blade American Line 660123 mini-scraper with a contoured grip. Is ideal tool for scraping or cleaning hard surfaces, removing labels, spills, paint, hob and oven cleaning etc. It comes carded with a single blade which reverses for storage.
Personna Plastic Mini Scraper + 1 Blade has been your wishlist!
Add to wishlist
Rodo Fftj Retractable Blades 9Mm (Skb) Fit For The Job SKB Replacement Snap Off Knife Blades 9mm Pack of 10 10 pack of 9mm snap-off blades. You must be over the age of 18 to purchase this product. By placing an order for this product, the customer verifies that they are over 18 years of age and are aware of all laws regarding the purchase of knives and other similar products. This item must be used responsibly and appropriately.
Rodo Retractable Blades 9Mm (Skb) has been your wishlist!
Add to wishlist
Osmo UV-Protection Oil Tints Douglas Fir 5ml 427S CLEAR PROTECTION FOR VERTICAL STRUCTURES Highly water and dirt resistant Clear UV Protection Oil 410 is safe for humans, plants and animals when dry Clear UV Protection Oil 420 Extra is furnished with active ingredients to protect the coating against mould, algae and fungal attack Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating Delays natural greying by 12 times in comparison to untreated wood 410 CLEAR Enhances the natural character of the wood. Supports a healthy living environment without the use of biocides to ensure the dry finish is safe for humans, plant and animal. 420 CLEAR Enhances the natural character of the wood. Contains biocides to protect against algae, mildew and fungal attack. FINISHES Clear Satin APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Vertical wood surfaces in outdoor areas RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L, 10L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 18m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Ideally, surfaces are sanded no finer than a P120 grit grade of sand paper. Sanding to finer grades will reduce required absorbency. Osmo UV-Protection-Oil Exra is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. If possible, and if the wood is an absorbent species, please apply the first coat to all sides before installation. Fresh wood containing natural wood ingredients /extractives (eg: Cedar, Larch, Teak, Mahogany or Iroko) are often less absorbent and need to weather off first before applying the product. Please refer to website ‘Suitability’ section for more details. Weathering helps ingredient rich wood become more absorbent and the wood finish adheres optimally. Weathering is also required if ingredient rich wood has been freshly sanded or renovated. A coloured base coat is recommended, e.g. Natural Oil Woodstain. Coloured base coats can improve UV protection. For renovations, clean old microporous wood finishes thoroughly. De-grey any weathered bare wood with Osmo Wood Reviver Power-Gel before applying an Osmo exterior product. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. To maintain absorbency, avoid sanding surfaces finer than a P120 grit. Weather ingredient rich wood after sanding. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Soft wood species like Pine or Spruce are more prone to blue stain, rot and insects. If desired, pre-treat these soft woods if possible on all sides with Osmo WR Base Coat.
Osmo UV-Protection Oil Tints Douglas Fir 5ml 427 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Rosewood 5ml 727S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Rosewood 5ml 727 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Fir Green 5ml 729S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Fir Green 5ml 729 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Oregon Pine 5ml 731S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Oregon Pine 5ml 731 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Teak 5ml 708S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Teak 5ml 708 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Stone Pine 5ml 710S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Stone Pine 5ml 710 has been your wishlist!
Add to wishlist
Osmo Country Colour Sunflower Yellow 5ml 2205S COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Sunflower Yellow 5ml 2205 has been your wishlist!
Add to wishlist
Osmo Country Colour Cedar/Redwood 5ml 2310S Water-Based, Oil-Modified Wood Stain Sample Description: Osmo Country Colour Cedar/Redwood 5ml 2310 is a water-based, oil-modified wood stain that provides a long-lasting, natural finish. It is ideal for use on interior wood surfaces, such as furniture, floors, and walls. Osmo Country Colour Cedar/Redwood 5ml 2310 is easy to apply and maintain, and it will help your wood surfaces look their best for years to come. Features: Water-based, oil-modified formula Provides a long-lasting, natural finish Easy to apply and maintain Suitable for use on interior wood surfaces Available in a variety of colors, including Cedar/Redwood Benefits: Protects your wood surfaces from the elements Makes your wood surfaces easier to clean and maintain Gives your wood surfaces a beautiful, natural finish Is affordable Comes with a warranty Application: Prepare the wood surface by cleaning it with a damp cloth and removing any dirt, dust, or grease. Apply the Osmo Country Colour Cedar/Redwood 5ml 2310 with a brush or roller, working in the direction of the wood grain. Allow the first coat to dry completely before applying a second coat, if desired. For best results, apply a third coat after 24 hours. Maintenance: Osmo Country Colour Cedar/Redwood 5ml 2310 can be refreshed with a light coat of furniture polish every few months.
Osmo Country Colour Cedar/Redwood 5ml 2310 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Red Cedar 5ml 728S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Red Cedar 5ml 728 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Clear Matt 5ml 701S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Clear Matt 5ml 701 has been your wishlist!
Add to wishlist
Osmo Country Colour Light Ochre 5ml 2203S COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Light Ochre 5ml 2203 has been your wishlist!
Add to wishlist
Osmo Concrete Oil Interior Clear 5ml 610S Product Description Osmo Concrete Oil Interior Clear 5ml 610 is a clear, satin finish that provides water and dirt resistance, as well as an anti-slip surface. It is ideal for use on interior concrete surfaces, such as floors, walls, and countertops. Osmo Concrete Oil Interior Clear 5ml 610 is easy to apply and maintain, and it will help your concrete surfaces look their best for years to come. Features Provides water and dirt resistance Anti-slip surface Easy to apply and maintain Lasts for years Made from high-quality materials Backed by a trusted brand Benefits Protects your concrete surfaces from the elements Makes your concrete surfaces easier to clean and maintain Gives your concrete surfaces a beautiful, natural finish Is affordable Comes with a warranty If you are looking for a clear, satin finish that provides water and dirt resistance, as well as an anti-slip surface, then Osmo Concrete Oil Interior Clear 5ml 610 is the perfect choice for you. Order yours today!
Osmo Concrete Oil Interior Clear 5ml 610 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Pearl Grey 5ml 906S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Pearl Grey 5ml 906 has been your wishlist!
Add to wishlist
Osmo Country Colour Medium Brown 5ml 2606S COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Medium Brown 5ml 2606 has been your wishlist!
Add to wishlist
Osmo Country Colour Labrador Blue 5ml 2501S COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Labrador Blue 5ml 2501 has been your wishlist!
Add to wishlist
Osmo Country Colour Signal Red 5ml 2311S COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Signal Red 5ml 2311 has been your wishlist!
Add to wishlist
Osmo Country Colour Charcoal 5ml 2703 Brand: Osmo Color: Charcoal Size: 5ml SKU: 2703S Features: Water-based, oil-modified wood stain Provides a long-lasting, natural finish Easy to apply and maintain Suitable for use on interior wood surfaces Benefits: Protects your wood surfaces from the elements Makes your wood surfaces easier to clean and maintain Gives your wood surfaces a beautiful, natural finish Is affordable Comes with a warranty Application: Prepare the wood surface by cleaning it with a damp cloth and removing any dirt, dust, or grease. Apply the Osmo Country Colour Charcoal 5ml 2703 with a brush or roller, working in the direction of the wood grain. Allow the first coat to dry completely before applying a second coat, if desired. For best results, apply a third coat after 24 hours. Maintenance: Osmo Country Colour Charcoal 5ml 2703 can be refreshed with a light coat of furniture polish every few months.
Osmo Country Colour Charcoal 5ml 2703 has been your wishlist!
Add to wishlist
Osmo Country Colour Dark Brown 5ml 2607 Brand: Osmo Color: Dark Brown Size: 5ml SKU: 2607S Features: Water-based, oil-modified wood stain Provides a long-lasting, natural finish Easy to apply and maintain Suitable for use on interior wood surfaces Benefits: Protects your wood surfaces from the elements Makes your wood surfaces easier to clean and maintain Gives your wood surfaces a beautiful, natural finish Is affordable Comes with a warranty Application: Prepare the wood surface by cleaning it with a damp cloth and removing any dirt, dust, or grease. Apply the Osmo Country Colour Dark Brown 5ml 2607 with a brush or roller, working in the direction of the wood grain. Allow the first coat to dry completely before applying a second coat, if desired. For best results, apply a third coat after 24 hours. Maintenance: Osmo Country Colour Dark Brown 5ml 2607 can be refreshed with a light coat of furniture polish every few months. Additional Information: Osmo Country Colour Dark Brown 5ml 2607 is a small sample size, perfect for testing the color and application of the product before purchasing a larger quantity. The sample size is also ideal for touch-ups or small projects. Osmo Country Colour Dark Brown 5ml 2607 is available for purchase online and at select retailers.
Osmo Country Colour Dark Brown 5ml 2607 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Patina 5ml 905S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Patina 5ml 905 has been your wishlist!
Add to wishlist
Osmo Country Colour Ivory 5ml 2204S COLOURFUL DIVERSITY Extremely weather and UV resistant Very water and dirt resistant Reduces wood swelling and shrinkage Natural wood grain is hidden Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 2101 WHITE 2203 LIGHT OCHRE 2204 IVORY 2205 SUNFLOWER YELLOW 2308 NORDIC RED 2310 CEDAR/REDWOOD 2311 SIGNAL RED 2404 FIR GREEN 2501 LABRADOR BLUE 2506 ROYAL BLUE 2507 DOVE BLUE 2606 MEDIUM BROWN 2607 DARK BROWN 2703 CHARCOAL 2704 DUSK GREY 2708 PEBBLE GREY 2716 ANTHRACITE GREY 2735 LIGHT GREY 2742 TRAFFIC GREY FINISHES Opaque White, Light Ochre, Ivory, Sunflower Yellow, Nordic Red, Cedar/Redwood, Signal Red, Fir Green, Labrador Blue, Royal Blue, Dove Blue, Medium Brown, Dark Brown, Charcoal, Dusk Grey, Pebble Grey, Anthracite Grey, Light Grey, Traffic Grey APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 10-12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900. Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Country Colour Ivory 5ml 2204 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain White 5ml 900S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain White 5ml 900 has been your wishlist!
Add to wishlist
Osmo Natural Oil Woodstain Ebony 5ml 712S INNOVATIVE AND DURABLE PROTECTION Base and top coat in one finish Fast drying Natural wood grain remains visible Extremely weather and UV resistant Very water and dirt resistant Resistant against algae, mould, mildew and fungal attack Reduces wood swelling and shrinkage Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications 700 PINE - UV-Resistance 701 CLEAR, MATT - UV-Resistance None 702 LARCH - UV-Resistance 703 MAHOGANY - UV-Resistance 706 OAK - UV-Resistance 707 WALNUT - UV-Resistance 708 TEAK - UV-Resistance 710 STONE PINE - UV-Resistance 712 EBONY - UV-Resistance 727 ROSEWOOD - UV-Resistance 728 RED CEDAR - UV-Resistance 729 FIR GREEN - UV-Resistance 731 OREGON PINE - UV-Resistance 732 LIGHT OAK - UV-Resistance 900 WHITE - UV-Resistance 903 BASALT GREY - UV-Resistance 905 PATINA - UV-Resistance 906 PEARL GREY - UV-Resistance 907 QUARTZ GREY - UV-Resistance FINISHES Various colour (Satin), Clear (Matt) APPLICATION TOOL Osmo Flat Brush or Osmo Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hours, Second coat: 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. METHOD OF APPLICATION With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 4-6 hours under good ventilation. Then apply a second coat. For renovation works, one coat applied to the clean and dry surface is usually sufficient. NOTE Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. Light transparent colour tones offer only limited UV protection; therefore they are not recommended for surfaces exposed to strong sunlight. Dried surface is at first satin-glossy and then satin. To extend the life of the coating, it is recommended to apply one final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying (not recommended for White 900). Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. All colour tones can be mixed with each other. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones. Transparent finishes allow the substrate to shine through. Depending on the wood species, the appearance of the colour tone may deviate from the original RAL/NCS colour tone. Osmo Natural Oil Woodstain is furnished with biocides and therefore it is only to be used in outdoor areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided. Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating. CARE Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean. Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
Osmo Natural Oil Woodstain Ebony 5ml 712 has been your wishlist!
Add to wishlist