Osmo

Enhance and Protect Your Wood in Crediton, Near Exeter, Devon, with Osmo Wood Treatment - Officially Stocked by Eakers DIY!

Discover the power of Osmo Wood Treatment, a superior solution for transforming and safeguarding your wood in Crediton, a charming town located near Exeter in the beautiful county of Devon. As the official stockist of Osmo, Eakers DIY, based in Crediton, proudly offers you access to this exceptional, all-natural formula that deeply penetrates the wood, providing long-lasting protection against moisture, UV rays, and more. Experience the lasting beauty of your wood with Osmo.

Our breathable and flexible formula allows your wood to naturally breathe and flex, effectively preventing unsightly cracks and peeling. Enjoy the peace of mind knowing that your wood is shielded from the elements. Applying Osmo Wood Treatment is a breeze, and it dries quickly, saving you valuable time and effort. Choose from a diverse selection of attractive colors to enhance and showcase the innate beauty of your wood.

As the official stockist of Osmo, Eakers DIY in Crediton is the go-to destination for professionals and DIY enthusiasts alike in Crediton, Exeter, and throughout Devon. You can trust our expertise and reliability in providing top-notch wood treatment solutions. Bid farewell to concerns about rot, decay, and fading, and say hello to resilient and stunning wood surfaces. Discover the Osmo difference today!

Visit our esteemed store, conveniently located in Crediton, near Exeter in Devon, or get in touch with us for expert guidance on protecting and maintaining your wood with Osmo Wood Treatment. Your wood deserves the utmost care, and as the official stockist of Osmo, Eakers DIY in Crediton delivers on its promise of excellence. Don't miss out on the opportunity to experience the transformative power of Osmo Wood Treatment in Crediton, near Exeter, and throughout Devon! #OsmoWoodTreatment #WoodProtection #UnleashNaturalBeauty


Filter results

Osmo Decking-Oil Thermowood 750ml 010C MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Douglas Fir 2.5L 004D MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Bog Oak 125ml 021A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Grey 125ml 019A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Bangkirai Dark 125ml 016A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Massaranduba 125ml 014A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Garapa 125ml 013A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Thermowood 125ml 010A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Larch 125ml 009A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Bangkirai 125ml 006A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Douglas Fir 125ml 004A MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Grey 750ml 019C MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Bangkirai Dark 750ml 016C MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Massaranduba 750ml 014C MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Decking-Oil Garapa 750ml 013C MEETING THE DEMANDS OF WOODEN DECKING Natural wood character remains visible Safe for humans, animals and plants once dry Highly water and dirt resistant Breathable therefore reducing water logging, swelling and shrinkage Microporous, penetrating finish which does not crack, peel or flake No sanding necessary when topping up coating 004 DOUGLAS FIR - Natural shade. 006 BANGKIRAI - Natural shade. 007 TEAK OIL - Clear finish. Wood greys naturally - UV-Resistance: None 009 LARCH - Natural shade. 010 THERMOWOOD - Natural shade. 013 GARAPA - Natural shade. 014 MASSARANDUBA - Natural shade. 016 BANGKIRAI DARK - Dark shade. 019 GREY - Grey shade. 020 BLACK - Black shade. 021 BOG OAK - Dark shade. FINISH Various APPLICATION TOOL Osmo Decking Brush RECOMMENDED USE Exterior wooden decking and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRY TIME 12 hours CLEAN UP Osmo Brush Cleaner COVERAGE 24m²/L with one coat COATS 2 coats, or one colour coat plus top coat of Osmo Anti-Slip Decking Oil 430 CARE Osmo Decking Cleaner SURFACE PREPARATION Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser). Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Greyed and weathered wood can be refreshed with Osmo Wood Reviver Power-Gel before applying Osmo Decking Oils. Avoid using jet / power washers to clean the surface as they can significantly affect the coverage of Osmo Decking Oils. Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Decking-Oil is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. Thoroughly clean or lightly sand old microporous stains or completely remove old varnishes before application. If any sanding works are carried out some fresh wood species must be weathered as directed above to improve absorbency once more. Sanding to finishing grades of no more than a P120 grit are recommended. Always wear a dust mask when sanding. If possible, and if the wood is absorbent please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insect attack is desired ( eg soft woods) , pre-treat the wood, if possible on all sides, with Osmo WR Impregnation. METHOD OF APPLICATION Use stiff brush (Osmo Flat Brush) or a lint free cloth (e.g. for furniture) and apply thinly and evenly to the clean and dry wood surface along wood grain. For a quick and easy application, we recommend using Osmo Decking Brush (150 mm) which was tailor-made for decking and allows you to apply the finish while standing. Allow for good ventilation while drying. Lower temperatures and higher humidity levels will delay drying. Once dry apply the second coat – also thinly. If a less intensive colour is desired, the second coat should be carried out with clear Anti-Slip Decking Oil 430. Generally the more rich and dark the colour chosen, the higher the level of UV protection offered. Avoid applying clear Anti-Slip Decking Oil 430 as a stand alone finish as this offers limited UV protection. Add to wishlist
Osmo Oil Stain Havanna 1L 3541 THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Add to wishlist
Osmo Oil Stain Black 1L 3590: The Ultimate Solution for Professionals Introduction: When it comes to wooden surfaces, professionals seek the quickest and most effective solutions. Osmo Oil Stain Black 1L 3590 is the go-to choice for those who demand excellence. Offering lightning-fast drying and curing times, exceptional durability, and a stunning range of color options, this product is designed specifically for commercial use. Whether you're working with common woods or exotic varieties, Osmo Oil Stain delivers outstanding results. In this comprehensive guide, we'll explore why Osmo Oil Stain is the preferred choice for professionals in the industry. Key Features: Lightning-Fast Drying and Curing: Osmo Oil Stain Black 1L 3590 is renowned for its rapid drying and curing capabilities. Professionals can save valuable time and complete projects faster, thanks to this exceptional feature. Unparalleled Durability: This product boasts extraordinary durability, ensuring your wooden surfaces remain in pristine condition even in high-traffic areas. It's exceptionally hardwearing, making it perfect for both flooring and furniture. Water and Dirt Resistance: Osmo Oil Stain provides superior protection against water and dirt. Its microporous, breathable finish keeps surfaces clean and pristine while preventing cracks, peeling, or flaking. Versatile Color Tones: With an array of attractive color tones, Osmo Oil Stain allows you to choose between transparent or intensive finishes. This versatility ensures you can achieve the desired aesthetic for your project. Commercial-Grade: Designed specifically for commercial use, Osmo Oil Stain Black 1L 3590 meets the rigorous demands of professionals. It's ideal for a wide range of applications, from large-scale flooring projects to intricate furniture pieces. Resists Common Spillages: Say goodbye to worries about spills. Osmo Oil Stain is resistant to common liquid spillages such as water, juice, tea, cola, and wine. It's even saliva-resistant and sweatproof, making it suitable for children's toys. Suitable for All Woods: Whether you're working with standard woods or exotic varieties, Osmo Oil Stain Black 1L 3590 is your trusted partner. It enhances the natural beauty of wood while providing unmatched protection. Application and Maintenance: Application Tool: Use the Osmo Floor Brush, Hand Pad, Double Blade Scraper, or Osmo Microfibre Roller, followed by a white pad for an even finish. Recommended Use: Ideal for interior wooden flooring and furniture, Osmo Oil Stain is a versatile choice for professionals. Recoat: When signs of wear become visible, a single coat is sufficient to refresh the surface. Dry Time: With Oil Stain Hardener, it dries in just 4 hours; without, allow 12 hours for optimal results. Clean Up: Use Osmo Brush Cleaner for easy cleanup. Coverage: Expect impressive coverage at 24-48m²/L with just one coat. Coats: Apply 1-2 coats and top it off with Osmo Polyx Oil for long-lasting protection. Surface Preparation: Before applying Osmo Oil Stain, ensure your wood surface is clean, dry, and frost-free. Sand carefully, and remove dust before proceeding. For unfamiliar surfaces, a trial application is recommended. Method of Application: Transparent color or intensive color, Osmo Oil Stain can be expertly applied with various tools. Ventilate well during drying for the best results. Care and Maintenance: Maintaining surfaces treated with Osmo Oil Stain is hassle-free. Regular cleaning with Osmo Wash and Care or Osmo Spray-Mop is recommended. For occasional maintenance, consider using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating is simple – just apply a single coat to the clean, dry surface when wear becomes noticeable. Experience Excellence with Osmo Oil Stain: Transform your woodworking projects into masterpieces with Osmo Oil Stain Black 1L 3590. Save time, ensure durability, and achieve impeccable results. Choose Osmo Oil Stain for wood surfaces that stand the test of time. Ready to Elevate Your Woodworking? Discover the power of Osmo Oil Stain today! Contact us now to place your order and experience the difference for yourself. Don't wait; elevate your woodworking projects to the next level with Osmo Oil Stain. Add to wishlist
Osmo Oil Stain Natural 5ml 3519S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Add to wishlist
Osmo Oil Stain Havanna 2.5L 3541D THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Add to wishlist
Osmo Oil Stain Tobacco 5ml 3564S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Add to wishlist
Osmo Oil Stain Cognac 5ml 3543S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Add to wishlist
Osmo Oil Stain Black 2.5L 3590D: Elevate Your Woodworking to the Professional Level Introduction: For woodworking professionals who demand excellence, Osmo Oil Stain Black 2.5L 3590D is the ultimate solution. This product offers a quick cure, making it perfect for time-sensitive projects. It combines lightning-fast drying and curing with exceptional durability, water and dirt resistance, and a stunning range of color options. Designed specifically for commercial use, it's suitable for all woods, including exotics, and even resists common liquid spills. In this comprehensive guide, discover why Osmo Oil Stain Black 2.5L 3590D is the choice of professionals in the industry. Key Features: Lightning-Fast Drying and Curing: Osmo Oil Stain Black 2.5L 3590D sets the standard for speed. Its rapid drying and curing times save valuable time on your projects. Exceptional Durability: This product is extremely hardwearing, ensuring your wooden surfaces remain pristine even in high-traffic areas. Water and Dirt Resistance: Osmo Oil Stain provides superior protection against water and dirt. Its microporous, breathable finish keeps surfaces clean and prevents cracks, peeling, or flaking. Versatile Color Tones: Choose from attractive transparent or intensive color tones to achieve the desired aesthetic for your project. Commercial-Grade: Designed specifically for commercial use, Osmo Oil Stain Black 2.5L 3590D meets the rigorous demands of professionals. It's ideal for a wide range of applications, from large-scale flooring projects to intricate furniture pieces. Resists Common Spillages: Say goodbye to worries about spills. Osmo Oil Stain is resistant to common liquid spillages such as water, juice, tea, cola, and wine. It's even saliva-resistant and sweatproof, making it suitable for children's toys. Suitable for All Woods: Whether you're working with standard woods or exotic varieties, Osmo Oil Stain Black 2.5L 3590D is your trusted partner. It enhances the natural beauty of wood while providing unmatched protection. Application and Maintenance: Application Tool: Use the Osmo Floor Brush, Hand Pad, Double Blade Scraper, or Osmo Microfibre Roller, followed by a white pad for an even finish. Recommended Use: Ideal for interior wooden flooring and furniture, Osmo Oil Stain is a versatile choice for professionals. Recoat: When signs of wear become visible, a single coat is sufficient to refresh the surface. Dry Time: With Oil Stain Hardener, it dries in just 4 hours; without, allow 12 hours for optimal results. Clean Up: Use Osmo Brush Cleaner for easy cleanup. Coverage: Expect impressive coverage at 24-48m²/L with just one coat. Coats: Apply 1-2 coats and top it off with Osmo Polyx Oil for long-lasting protection. Surface Preparation: Before applying Osmo Oil Stain, ensure your wood surface is clean, dry, and frost-free. Sand carefully, and remove dust before proceeding. For unfamiliar surfaces, a trial application is recommended. Method of Application: Transparent color or intensive color, Osmo Oil Stain can be expertly applied with various tools. Ventilate well during drying for the best results. Experience Excellence with Osmo Oil Stain: Transform your woodworking projects into masterpieces with Osmo Oil Stain Black 2.5L 3590D. Save time, ensure durability, and achieve impeccable results. Ready to Elevate Your Woodworking? Discover the power of Osmo Oil Stain today! Contact us now to place your order and experience the difference for yourself. Don't wait; elevate your woodworking projects to the next level with Osmo Oil Stain. Add to wishlist
Osmo Oil Stain Jatoba 5ml 3516S THE QUICK CURE FOR PROFESSIONALS Especially fast drying and curing Extremely durable and hardwearing Very water and dirt resistant Attractive colour tones, transparent or intensive Specifically for commercial use Suitable for all woods including exotic woods Resistant to common liquid spillages such as water, juice, tea, cola and wine Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications 3501 WHITE 3512 SILVER GREY 3514 GRAPHITE 3516 JATOBA 3518 LIGHT GREY 3519 NATURAL 3541 HAVANNA 3543 COGNAC 3564 TOBACCO 3590 BLACK FINISHES Colours (Satin) APPLICATION TOOL Osmo Floor Brush, Hand Pad, Double Blade Scraper or Osmo Microfibre Roller, followed by white pad RECOMMENDED USE Interior wooden flooring and furniture RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 1L, 2.5L DRY TIME 4 hrs with Oil Stain Hardener, 12 hrs without CLEAN UP Osmo Brush Cleaner COVERAGE 24-48m²/L with one coat COATS 1-2 coats, plus top coat of Polyx Oil CARE Osmo Wash and Care, or Spray-Mop SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring grit P120-150, for furniture girt P220-240. Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. METHOD OF APPLICATION Transparent colour: with Osmo Floor Brush, Osmo Microfibre Roller, Oil Finish Applicator Fleece (Hand Pad Holder) or Double Blade Scraper, apply very thinly and evenly to the clean and dry wood along the wood grain and rub into the wood with a white pad. For larger areas use the Osmo Floor-X- center / white pad for an even colour tone. Allow to dry for approx. 12 hours under good ventilation. Intensive colour: if a stronger colour is desired, apply thinly along the wood grain with Osmo Microfibre Roller or Floor Brush, and spread well. Please note, Oil stain will penetrate quite quickly therefore on thirsty woods a hand application may appear patchy. Trial applications highly recommended first. For best results, rub in to the wood with white pad. Tip: With an unused Osmo Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Ventilate well while drying. If an even more intensive colour is desired, apply a second coat with Osmo Double Blade Scraper, Osmo Microfibre Roller or Floor Brush, and rub into the wood with a white pad. Ensure first coat of Osmo Oil Stain has fully dried before rubbing in second coat with white pad. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx ?-Oil. For smaller areas, e.g. furniture, Osmo Oil Stain can be applied with a lint-free cloth. NOTE Applications with the Hardener for Oil Stain 6631 as drying accelerator are also possible as an option. Please observe the instructions for a correct application. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx ?-Oil 2K Pure. A trial application is recommended. Colour tone 3501 White: An intensive white surface is not recommended for flooring because it is more sensitive and prone to natural yellowing. As a top coat for such surfaces, the pigmented Polyx ?-Oils 3040 or 3240 (White transparent) is recommended. Colour tone 3519 Natural: A thin coat is recommended either with Osmo Microfibre Roller or Floor Brush. After drying, a coat with a clear Osmo Polyx ?-Oil should be carried out. The natural colour tone of wood is preserved – it does not enhance the tone of wood, no permanent wet effect. This finish leaves white streaks on red/dark wood species. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating. Allow finish to fully cure before heavy usage. CARE Regular Cleaning:  Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop. Occasional Maintenance:  Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil. Recoating:  Simply re-apply one coat onto the clean and dry surface when signs of wear become visible. Add to wishlist
  • 1
  • 2
  • 3
  • 4
  • ...
  • Next
  • Showing 1 - 24 of 496 results