Liberon Stone Floor Cleaner is ideal for removing built-up layers of dirt, grease and Liberon Stone Floor Shine from previously sealed and unsealed terracotta and natural stone flooring.
Application: Dilute Cleaner to a 25% solution in warm water. Apply using a mop or sponge, rubbing more vigorously over dirty areas. Allow the product to work on the surface for 10-15 minutes then rinse several times with clean warm water and allow to dry thoroughly. To remove stubborn stains pour a small amount of Cleaner onto the stain. Let the product work for 15 minutes then scrub with a brush to remove the stain. Rinse and allow to dry.
Maintenance: Use as often as required. To re-shine floors already sealed with Liberon Stone Floor Sealer apply Liberon Stone Floor Shine.
Liberon Advice: If treating new stone, once your stone or terracotta floor has been cleaned it will need protecting from water and staining with Liberon Stone Floor Sealer. Finish with either Liberon Stone Floor Wax, or for a more durable surface with Stone Floor Shine.
Precautions: Wear protective gloves. Not suitable for cleaning waxed vinyl or plastic floors.
Heath and Safety: Keep out of the reach of children. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Use only in well-ventilated areas. Do not allow to freeze.
Packaging: Stone Floor Cleaner is available in 1 L and 5 L containers. For further information on this or other Liberon products please contact Liberon Technical Services on 01797 361136.
|