HG Hagesan  spot stain remover

CLEANS OIL, GREASE, FAT AND OTHER STUBBORN STAINS FROM A VARIETY OF SURFACES SUCH AS QUARRY AND TERRACOTTA TILES, BRICK, NATURAL STONE, ETC.

APPLICATION

For quarry tile, terra cotta, brick, marble, travertine, terrazzo and granite. Also forconcrete surface of driveways, garages and workshop Floors.

DIRECTIONS FOR USE

Shake the bottle thoroughly before use. Can be used undiluted on areas of severestaining, otherwise dilute up 1 to 5 parts with (preferably warm) water. Apply andspread evenly on the areas to be cleaned. Use a stiff broom or scrubbing brush.Scrub for a little while and leave for 5 - 10 minutes to react. When staining isloosened, mop up and rinse off thoroughly with plenty of clean water. On veryabsorbent surfaces the application may need to be repeated. To remove HG  impregnator  or HG  marble impregnator , HG  spot stain remover  must bediluted up 1 to 3 parts with water. Use a stiff broom or scrubbing brush.Scrub for a little while and leave for 20 minutes to react. Scrub again and then rinse off with plenty of water.

HG spot stain remover removes grease and oil from floor tiles, flagstones, natural stone, concrete and cement surfaces. It is also suitable for removing HG impregnating sealer and HG marble impregnator. Dilute HG spot and stain remover with water depending on the level of soiling. Then apply with a scrubbing brush. Allow a few minutes for the product to work, scrub well and rinse off with water.