HG Hagesan polish, wax and dirt remover

INTENSIVE (DEEP) CLEANING. REMOVES POLISH, WAX, GREASE, STUBBORN DIRT AND OILS SELF ACTIVE. 

APPLICATION 

For quarry tiles and non calcareous natural stone. 

DIRECTIONS FOR USE For difficult areas dilute HG remover with a minimum 1:4 parts of lukewarm water. In less severe cases dilute 1:10 parts of lukewarm water. When a scrubbing machine is used dilute 1:50 up to 1:100, depending on the degree of dirt. Apply the solution liberally on the floor treating up to 10-15m2 at a time. Leave the solution to work for approx. 5-10 minutes. Do not allow the floor to dry out. Scrub the floor and when clean, mop up the emulsified dirt. Rinse 2 or 3 times thoroughly with clean water afterwards.

HG polish, wax and dirt remover (HG remover) takes out grease marks, ingrained dirt and removes old layers of polish, such as HG satin gloss polish (HG golvpolish) for example. It also removes old or worn coatings of wax. Dilute HG polish, wax and dirt remover (HG remover) with water. Then apply with a scrubbing-brush. Allow a few minutes for it to work, and scrub well. Rinse off the surface with water. One litter is enough for a surface area of 20 to 50 m 2.