HG impregnating sealer, HG impregnator

Home Page

- HG Products (Hagesan)

- Wood Burning Stoves, Multi

- Inset Wood Burning Stoves

- Small Wood Burning Stoves

- DEFRA Stoves

- Dimplex Fires & Electric

- Electric Stove

- Homeware

- Osmo Polyx Products

- Wooden Toilet Seats

- Dulux Products

- Fireplace Accessories

About the Company

Ebay Listings

Special Deals

Insider Tips and Tricks

News

Products › Browse Catagories › HG Products (Hagesan) › Tile Products › HG Hagesan impregnating sealer (HG impregnator)

Click to Enlarge Image

Price:£12.44
Quantity:

HG Hagesan impregnating sealer (HG impregnator)

A DURABLE LIQUID PROTECTOR PROTECTS FLOORS FROM STAINS AND STUBBORN MARKS ALLOWS THE SURFACE TO BREATH

APPLICATION

For terra cotta tiles, bricks and natural stone. For inside and outside use.

DIRECTIONS FOR USE

The surface to be treated should be perfectly clean and absolutely dry.Remove cement and grout stains with HG Hagesan Cement Grout Film Remover (Extra). Use HG Hagesan polish, wax and dirt remover for cleaning. After rinsing-off allow at least 3 days for the surface to dry. HG impregnator is used neat. Apply evenly by brush, spray or non-fluff cloth. Leave for a maximum of 5 minutes to penetrate. After treatment the surface should retain a mat appearance. Any surplus resting on the surface (leaving a gloss finish) after this time must be removed with a cloth dampened with white spirit if necessary. Allow 2 hours before applying a second or more coats. After approximately 4 hours the surface can be walked upon. Exterior stone or brick walls require no further treatment. Clean tools with white spirit. Once dry HG impregnator can only be removed with HG spot stain remover .

HG impregnating sealer (HG impregnator) penetrates deep into the surface and completely seals off small pores. Larger pores are made smaller meaning liquid molecules can no longer be absorbed. However any dampness in the floor can still evaporate. It is suitable for inside and outside use. Apply HG impregnating sealer (HG impregnator)evenly in one direction with a paint roller or a non fluffy cloth. Allow to penetrate for a maximum of 5 minutes. Then remove any surplus with a dry cloth. One litre is enough

Back to Tile Products