HG Hagesan hygienic whirlpool bath cleaner

During the use of a whirlpool bacteria will grow and the system will become polluted, due to the ingress of lime, soap, grease and oils. After the bath has been emptied, the bacteria and pollution will continue to grow. In some cases this can result in an unpleasant smell. HG hygienic whirlpool bath cleaner cleans the whirlpool system in a hygienic manner, and through natural products, without danger to the integrated system or the environment. There will be no problems with the removal of the pollution and the sources of unpleasant odors. Regular use of HG hygienic whirlpool bath cleaner will extend the lifecycle of the whirlpool. Fill the whirlpool with warm water, up to 5 cm above the highest opening in the jets for water and air. Add 50 to 75 ml of HG hygienic whirlpool bath cleaner directly to the contents of the bath. Activate the system and allow it to run for approximately 15 minutes. Empty the bath and rinse it thoroughly, using clean water. To prevent the build up of container pollution, repeat the treatment every 2 to 3 weeks, depending on the use of the whirlpool, or fill the whirlpool's integrated cleaning system, or the automatic cleaning system, with HG hygienic whirlpool bath cleaner. Refer further to the instruction manual for your whirlpool.  

BASED ON NATURAL MATERIALS (LACTIC ACID AND TEA TREE OIL). CLEANES HYGIENICALLY, REMOVES UNPLEASANT SMELLS.

REMOVES LIMESCALE, GREASE, SOAP AND OIL. ENVIRONMENT FRIENDLY.  

APPLICATION  

In hygienic whirlpool bath cleaners.  

DIRECTIONS FOR USE  

For whirlpools with internal (semi) automatic cleaning systems:1) Fill the internal cleaning system with HG   hygienic whirlpool bath cleaner 

2) Follow the directions for use of your whirlpool.

For whirlpools without internal cleaning systems:

 1) Fill the whirlpool with warm water to 5 cm above the highest openings of the water or air jets.2) Pour 50 – 75 ml ( 1-1,5 cups) of HG   hygienic whirlpool bath cleaner directly into bath.

3) Turn on all the systems for 15 min

4) Empty the bath and rinse with clean water. Repeating the treatment with clean water is not necessary. To prevent dirt building up we would advise you, depending on how often the whirlpool is used, to clean it once every2-3 weeks.