HG Hagesan Cement Grout Film Remover (Extra) 1L

REMOVES CEMENT FILM, LIME. RUST STAINS AND STUBBORN RESIDUES.

APPLICATION 

On quarry tiles, glazed tiles, brick, stone and slate, also on other surfaces aschrome, stainless steel, etc. 

DIRECTIONS FOR USE First try HG extra small, preferably inconspicuous area. Dilute up to 1:10parts clean cold water. In bad cases HG extra can be used neat. Apply the solutionliberally and spread over the surface. Covering no more than 10 - 15 m2 at a time.Allow 15 minutes for the solution to activate. During this time the surface should bekept wet with the HG “extra” solution. Scrub thoroughly with a souring pad or a stiffscrubbing brush and mop up. Rinse well with water at least 2 - 3 times. If necessaryrepeat same application but locally, when white stains appear. 

ATTENTION 

Please beware! Do not apply to calciferous natural stone such as marble, travertine,Blue (hard)stone, several types of slate, terrazzo, granito and cement tiles, or on other surfaces, which are not acid-resistant. For Calcareous Natural Stones Use Marble & Natural Stone,Cement and Lime Film Remover.

HG cement grout film remover (HG extra) removes cement film from the face of tiles without affecting the grout. Its reacts chemically with the surface of the grout to harden it. This means that the grout is stronger and more resistant to dirt. Dilute HG cement grout film remover (HG extra) in water. Then apply with a scrubbing brush. Allow a few minutes for the product to work, scrub well and rinse off with water. One litter is enough for a surface area of 20 to 50 m². Use HG porcelain cleaner (HG quick) on floors when cleaning for the first time to remove the very last remains of cement.