Product use Liberon Black Bison Wax Fine Paste is ideal for nourishing and protecting all types of wood, including lacquers and French polishes. Black Bison Wax is well known for its quality and distinctive, pleasant smell. It is traditionally used on antiques but is also suitable for use on modern furniture and will enhance the natural beauty of wood whilst protecting it against dryness.
Preparation Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary.
Application Apply Black Bison Fine Paste Wax sparingly with a cloth on a delicate / French polished surface or with Ultra Fine steel wool (Liberon grade 0000) when a deeper penetration is required. Allow to dry for 20 minutes, or until touch dry, and then buff with a clean cotton cloth or furniture brush. Repeat the operation on new or very dry wood as it may require two or more coats. For a better finish, buff with the Liberon Furniture Brush once the last coat has dried. For a higher sheen build-up with thin coats of wax, buffing between coats.
Important Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
Cleaning and maintenance Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash with water.
Colours Antique Pine, Clear, Dark Oak, Georgian Mahogany, Golden Pine, Maple, Medium Mahogany, Medium Oak, Neutral, Stripped Pine, Tudor Oak, Teak, Victorian Mahogany, Walnut and Yew.
Packaging Black Bison Paste Wax is available in 150 ml, 500 ml and 5 L containers.
Health and Safety Flammable. Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children. Do not empty into drains. Use only in well-ventilated areas. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. Silicon Free. For further information on this or other Liberon products please contact Liberon Technical Services on 01797 361136.
|
