Product use Liberon Beeswax Paste is ideal for nourishing absorbent woods such as pine and oak, especially unsealed. It's natural properties help protect wood and guard against dryness. It is particularly suitable for small surfaces and furniture.
Preparation Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary. Ensure the surface is clean, dry and free from dust.
Application Apply a coat of Liberon Beeswax Polish sparingly with a soft, lint-free cotton cloth or Liberon Ultra Fine Steel Wool (0000). Allow to dry for a minimum of 1 hour – longer if possible, then buff with a clean cotton cloth or Liberon Drill Brush. Repeat the operation on new or very dry wood as it may require two or more coats. For a higher sheen build-up with thin coats of Beeswax, buffing between coats. Buff with a Liberon Furniture Brush or Drill Brush once the last coat has completely dried.
Important Always test product on a spare surface or inconspicuous area for colour, compatibility and end results.
Cleaning and maintenance Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash with water.
Precautions Not suitable for high water areas such as kitchens and bathrooms.
Colours Clear, Dark and Antique Pine.
Packaging Liberon Beeswax Paste is available in 150 ml, 500 ml and 5 L containers.
Heath and Safety Irritant. Contains Turpentine. Flammable. May cause skin sensitisation by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children. Avoid contact with skin. Do not empty into drains. Wear suitable gloves. Use only in well ventilated areas. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. For further information on this or other Liberon products please contact Liberon Technical Services on 01797 361136.
|
